Notices
04-06 Ralliart Engine/Drivetrain (no forced induction)

Odd Question

Thread Tools
 
Search this Thread
 
Old Oct 19, 2009 | 09:26 PM
  #1  
Corton520's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2009
Posts: 168
Likes: 0
From: Arizona
Odd Question

I've done some searching but still have not come up with anything.
I'm looking to get headers and the only place I have seen them were through rrm. Is there any other vendor that has headers? I can't seem to find some directly for our engine, but i have taken notice we have the same engine as a galant???? if so will headers made for the galant fit the ralliart?
thanks in advance
Reply
Old Oct 19, 2009 | 09:33 PM
  #2  
Raikiri's Avatar
Evolved Member
iTrader: (21)
 
Joined: Oct 2008
Posts: 2,729
Likes: 16
From: Chicago, IL
only other headers i can think of would be the obx headers off ebay or rpw from australia. i dont know if galant engine parts will fit our car though... im sure others will have that information
Reply
Old Oct 19, 2009 | 10:31 PM
  #3  
Corton520's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2009
Posts: 168
Likes: 0
From: Arizona
so in other terms would i be safe just going with rrm? cuz right now im just looking for the headers not so much the downpipe
Reply
Old Oct 20, 2009 | 10:46 AM
  #4  
soulesswarrior's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2008
Posts: 964
Likes: 0
From: fallbrook
You want the downpipe. The downpipe on the car stock is horrible. And I highly sugest rrm headers their great
Reply
Old Oct 20, 2009 | 12:50 PM
  #5  
Raikiri's Avatar
Evolved Member
iTrader: (21)
 
Joined: Oct 2008
Posts: 2,729
Likes: 16
From: Chicago, IL
You don't NEED to reace the headers as they're decent but the stock downpipe is what chokes the car's exhaust system. Unfortunately rrm doesn't offer just their downpipe anymore but their header/dp setup is solid and you'll feel the difference or at least hear it over oem stuff
Reply
Old Oct 20, 2009 | 01:11 PM
  #6  
soulesswarrior's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2008
Posts: 964
Likes: 0
From: fallbrook
Well the stock headers look good but when u pull them you'll see their dual walled an kind of restrictive. Agreed that most gain is from the dp though
Reply
Old Oct 20, 2009 | 05:01 PM
  #7  
GearDownSon's Avatar
EvoM Staff Alumni
iTrader: (11)
 
Joined: Apr 2004
Posts: 1,531
Likes: 3
From: NC
Wouldn't headers for the eclipse work with ours?
(the 4cyl that is)
Reply
Old Oct 20, 2009 | 06:19 PM
  #8  
Arxylis's Avatar
Evolving Member
iTrader: (4)
 
Joined: Apr 2007
Posts: 313
Likes: 0
From: Rising Sun, Indiana
I've got the OBX header and downpipe on my Ralliart. Got it on Ebay for about $280 shipped. Also had to get an O2 sensor plug (there's a bung on one of the runners) and a bung welded on the downpipe for the first O2 sensor. So all in all $300-ish, which is a pretty good deal. I've had it on my car since the beginning of June and it's been great so far.
Reply
Old Oct 20, 2009 | 09:26 PM
  #9  
gary_06ralliart's Avatar
Newbie
 
Joined: Aug 2008
Posts: 50
Likes: 0
From: fullerton california
does anybody sale just a downpipe??
Reply
Old Oct 20, 2009 | 09:38 PM
  #10  
Corton520's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2009
Posts: 168
Likes: 0
From: Arizona
haha yeah thats my question too!? ^^^^
Reply
Old Oct 20, 2009 | 09:57 PM
  #11  
soulesswarrior's Avatar
Evolved Member
iTrader: (8)
 
Joined: Aug 2008
Posts: 964
Likes: 0
From: fallbrook
Could probably get a downpipe made at a shop to match ur headers fairly cheap
Reply




All times are GMT -7. The time now is 04:20 AM.