Can you hear the Mivec Switchover?
no u misunderstood me. ofcourse they gain torque since the cam angles are getting more aggressive.... what i mean is the change-over isnt smooth so u get a more sudden burst of torque compared to mivec should is a more smoother torque gain.
i was alil surprised myself but i read this from a couple different honda tuner mags. i read just simply by smoothing the vtec changeover, u can squeeze out some more torque in the mid-range in most hondas (but ofcourse u'll feel the vtec much less)
i was alil surprised myself but i read this from a couple different honda tuner mags. i read just simply by smoothing the vtec changeover, u can squeeze out some more torque in the mid-range in most hondas (but ofcourse u'll feel the vtec much less)
no u misunderstood me. ofcourse they gain torque since the cam angles are getting more aggressive.... what i mean is the change-over isnt smooth so u get a more sudden burst of torque compared to mivec should is a more smoother torque gain.
i was alil surprised myself but i read this from a couple different honda tuner mags. i read just simply by smoothing the vtec changeover, u can squeeze out some more torque in the mid-range in most hondas (but ofcourse u'll feel the vtec much less)
i was alil surprised myself but i read this from a couple different honda tuner mags. i read just simply by smoothing the vtec changeover, u can squeeze out some more torque in the mid-range in most hondas (but ofcourse u'll feel the vtec much less)
same with our cars
and I didn't misunderstand, i was agreeing and elaborating. I did have to read your post twice more to be sure though
Evolving Member
Joined: Aug 2005
Posts: 141
Likes: 0
From: City Of Sins
Evolving Member
Joined: Aug 2005
Posts: 141
Likes: 0
From: City Of Sins
Could you imagine.
Two cars rolling, one of them being the RA, the other being a Honda Integra. Honda pulls up, lights go green, they are both just cruising...
THEN, both engines start revving a bit high, both know there is a rolling start happening, theres a tunnel just down a few 100 metres, the Honda takes off, RA without hesitation gives chase....3.. 2.......1. BOOM 3500rpm !! HITS THE MIVEC.. Honda on its way.... BOOM HITS THE VTEC...both enter the tunnel, screams of MIVEC and VTEC down the tunnel pass a WRX and an EVO rofl..
Then again, if a WRX and EVO did the same thing, lawl
Two cars rolling, one of them being the RA, the other being a Honda Integra. Honda pulls up, lights go green, they are both just cruising...
THEN, both engines start revving a bit high, both know there is a rolling start happening, theres a tunnel just down a few 100 metres, the Honda takes off, RA without hesitation gives chase....3.. 2.......1. BOOM 3500rpm !! HITS THE MIVEC.. Honda on its way.... BOOM HITS THE VTEC...both enter the tunnel, screams of MIVEC and VTEC down the tunnel pass a WRX and an EVO rofl..
Then again, if a WRX and EVO did the same thing, lawl
lets make that happen
sounds like one hell of a race
Thread Starter
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
lol you cannot escape.
Bad thing about yellow cars is, theres not many and if you do something wrong, you'll be found out..
Imagine this: cop: yeah I believe its a yellow RA 05..
cop2: theres not many... let him go, I'll visit him at his home
lol.
Bad thing about yellow cars is, theres not many and if you do something wrong, you'll be found out..
Imagine this: cop: yeah I believe its a yellow RA 05..
cop2: theres not many... let him go, I'll visit him at his home
lol.
Evolved Member
Joined: Mar 2005
Posts: 687
Likes: 0
From: Ponce P.R.
If you got header or downpipe, an exhaust system and intake, you can hear that sonovavveaccht when it gets on the cam. At least when it first gets on it. Mivec kinda hangs for a little while unlike vtec or vvtli which always disengage at the same RPM, in Mivec RPMs have to go lower for it to disengage.
With the Flywheel it really sounds devilishly when it gets on the cam. Cant wait to get a high lift cam just to hear that baby go into Mivec
With the Flywheel it really sounds devilishly when it gets on the cam. Cant wait to get a high lift cam just to hear that baby go into Mivec
Thread Starter
Evolved Member
Joined: Jul 2006
Posts: 1,839
Likes: 0
From: Australia
Yep the next mod is definitely a camshaft!
hey lanzzeralliart, your 85 shot of nos, how much whp are you getting? Is it hard to install a nos kit to the car? is it install friendly or nowhere near?
hey lanzzeralliart, your 85 shot of nos, how much whp are you getting? Is it hard to install a nos kit to the car? is it install friendly or nowhere near?
Last edited by MITVRX; Mar 27, 2007 at 08:25 PM.
Evolved Member
Joined: Aug 2006
Posts: 570
Likes: 0
From: Halli Wood
actually my car with my custom CAI, it makes a sound
(almost like vtec switch over) but at 4,500 RPM
I have 4 videos on YOUTUBE
http://www.youtube.com/watch?v=P7uKIn9gDDg
http://www.youtube.com/watch?v=itY_db7UiNI
http://www.youtube.com/watch?v=N67GGx7IA5M
http://www.youtube.com/watch?v=zCVMjl5PjAw
(almost like vtec switch over) but at 4,500 RPM
I have 4 videos on YOUTUBE
http://www.youtube.com/watch?v=P7uKIn9gDDg
http://www.youtube.com/watch?v=itY_db7UiNI
http://www.youtube.com/watch?v=N67GGx7IA5M
http://www.youtube.com/watch?v=zCVMjl5PjAw
Last edited by egk-69; Mar 27, 2007 at 09:02 PM.
