Notices

Extreme Dimensions....BAD!

Old Feb 13, 2009 | 12:13 PM
  #1  
Lancerzz's Avatar
Thread Starter
Evolving Member
 
Joined: Jul 2007
Posts: 182
Likes: 0
From: Atlanta, GA
Extreme Dimensions....BAD!

So after riding around for about a year with no front lip on my car i decided to get a new front lip for the car. Figured the extreme dimensions one was just like the factory one, but it seems they just use a factory pic to show but thats not what you get. The one they sent was too short, and the epoxy they use to attach the studs to the lip is so thick that it is impossible for the lip to sit flush with your bumper so the lip sticks out away from the bumper leaving a nasty gap. The guy at the shop was really upset about the lip being so poorly made. I'm so glad i went to the local NOPI store and ordered it instead of getting it offline, cause the guy at Nopi told me to bring it by so he can take pictures to send to Extreme Dimensions so they can get there **** together. When the guy at nopi saw it he couldnt believe they would send a piece like that out, since they ordered it directly from extreme dimensions they are supposed to take care of it. Just waiting on my call now to see what they are gonna do to fix this issue. This is the pic they use to show the lip http://www.andysautosport.com/mitsub...r00078453.html but trust me, that is not the lip you get.
Reply
Old Feb 13, 2009 | 12:55 PM
  #2  
sovain's Avatar
Evolving Member
 
Joined: May 2008
Posts: 100
Likes: 0
From: ontario,canada
has anyone else dealt with this company?are they any good?
Reply
Old Feb 13, 2009 | 03:03 PM
  #3  
Lancerzz's Avatar
Thread Starter
Evolving Member
 
Joined: Jul 2007
Posts: 182
Likes: 0
From: Atlanta, GA
Also forgot to add that none of the studs lined up with any of the holes from the stock lip so he had to drill new holes, and the epoxy that holds the studs to the bumper was so fragile they as soon as he put the lip up against the bumper to tighten them down they all came off, before he even got a chance to tighten them.
Reply
Old Feb 13, 2009 | 06:34 PM
  #4  
Beardly P's Avatar
Hail to the Beard
iTrader: (18)
 
Joined: Dec 2008
Posts: 1
Likes: 8
From: Somewhere with TIF
maybe they just sent the wrong one?
Reply
Old Feb 13, 2009 | 11:00 PM
  #5  
Thomar's Avatar
Evolved Member
 
Joined: Feb 2008
Posts: 1,334
Likes: 0
From: Edmonton, AB
sounds to me like they sent the wrong one.
Reply
Old Feb 14, 2009 | 07:14 AM
  #6  
wake's Avatar
Newbie
iTrader: (2)
 
Joined: Jan 2008
Posts: 89
Likes: 0
From: Montreal
I heard some stories like that. The body kits sold by them need a lot of work to fit it good.
Reply
Old Feb 14, 2009 | 05:09 PM
  #7  
Lancerzz's Avatar
Thread Starter
Evolving Member
 
Joined: Jul 2007
Posts: 182
Likes: 0
From: Atlanta, GA
Trust me its the right one, just a bad process of putting it together. If they would make the studs the same as the factory it would work better, the gunk they use to mount the studs to the lip doesnt hold the studs properly and they put so much that it prevents the lip from mounting flush to your bumper so the lip is sticking out off of the bumper.
Reply
Old Apr 19, 2009 | 05:55 PM
  #8  
PromDizzle's Avatar
Newbie
 
Joined: Mar 2009
Posts: 65
Likes: 0
From: Kelowna, B.C.
i just ordered a evo 8 wing from them, chances are it could have the same problem? should i cancel it before i get it?
Reply
Old Apr 19, 2009 | 10:44 PM
  #9  
Thomar's Avatar
Evolved Member
 
Joined: Feb 2008
Posts: 1,334
Likes: 0
From: Edmonton, AB
meh, try it when it gets there. if not, send it back.
Reply
Old Apr 19, 2009 | 11:03 PM
  #10  
PromDizzle's Avatar
Newbie
 
Joined: Mar 2009
Posts: 65
Likes: 0
From: Kelowna, B.C.
think the clause was no refunds, no warranties, thats not very promising.
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 07:44 PM.