getting my exhaust this week and then a stage 2 tune from AMS with the intake

 

i got the cp-e downpipe and tried putting it in but have had no luck so far. the design of their pipe makes it very difficult. the flex part of the downpipe is way wider than 3" on the outside and makes it hard to get the bolts in... plus i dont know if URs is like this but the cp-e downpipe's top flange isnt connected (so you can rotate it into postion. but trying to hold the flange in the right spot, hold up the downpipe and put the screw in at the same time is rough.

 

Where you at around here, i'll help. I've got a full turboback coming from UR here next week.

 

i'm in oviedo off of mitchell hammock. where do you live?

 

I'm in the Lake Mary area. Off Rinehart and 417.

 

PM'ed

 

Here's my pics of the exhaust, dirty though

 

more

 

and more

 

so yeah UR DP and testpipe, then cutoff valve, followed by 2 resonators, and the magnaflow exhaust

 

hoky smokes dude.

 

let me know how the stage 2 goes with the mods u already have done. i'm looking to see where to go next with a down pipe and exhaust and then get a custom flash from AMS

 

As soon as my cable comes in then I can get Chris at AMS to get my flash ready, for full turboback exhaust, and intake, with boost pill, so I guess stage 2 like yours but with full exhaust

 

Did some more testing with my exhaust cutoff valve, If i open it up all the way, I lose power, and when i floor it its takes a bit before it goes, but if i crack it open just to hear the rumble, and give it, it has way more jam, and torque, so for sure there's a increase..and it sounds great, loud but great :-D

 

Keep me posted