2009 Lancer Ralliart - GST Basemap
#4966
Evolved Member
If the CEL is always on for the rear o2 sensor, then if something ELSE goes wrong, you wouldn't be able to tell because the CEL was already on. Otherwise you'd have to keep pulling the code every day to make sure no new codes were being tripped.
-----
Anyway if anyone reading this later on was interested in a non-stupid answer, I figured out the solution
In your tune XML go to the table "ECU Options Set 2" and change Bit 1 (disable rear o2 sensor) from 1 to 0. You may have to go to the options first and change user level to developer, which will allow you to edit the tables. This will disable readiness and allow you to pass in Texas and many other states with annoying emissions tests.
I have no more Service Engine Soon light! Yay! Also btw this is on a 2010 Ralliart 93 octane BoostPill + TBE, so I'm not certain if it's the same for other cars/tunes.
Edit: btw I drove for probably about 4 hours (including highway driving, hard accel and idling) since making this change and it hasn't come back. I'll update if anything changes but I don't see why it would.
-----
Anyway if anyone reading this later on was interested in a non-stupid answer, I figured out the solution
In your tune XML go to the table "ECU Options Set 2" and change Bit 1 (disable rear o2 sensor) from 1 to 0. You may have to go to the options first and change user level to developer, which will allow you to edit the tables. This will disable readiness and allow you to pass in Texas and many other states with annoying emissions tests.
I have no more Service Engine Soon light! Yay! Also btw this is on a 2010 Ralliart 93 octane BoostPill + TBE, so I'm not certain if it's the same for other cars/tunes.
Edit: btw I drove for probably about 4 hours (including highway driving, hard accel and idling) since making this change and it hasn't come back. I'll update if anything changes but I don't see why it would.
Rich
#4970
Not Found
The requested URL /users/bryan/mods/basemaps/V31.003V31.003/BoostPill/AUS_EDM/2009_RA_AUS_EDM_BaseMap_BoostPILL_98ron_V31.003.he x was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Anyone have a copy?
The requested URL /users/bryan/mods/basemaps/V31.003V31.003/BoostPill/AUS_EDM/2009_RA_AUS_EDM_BaseMap_BoostPILL_98ron_V31.003.he x was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Anyone have a copy?
#4971
http://norcalmotorsports.org/users/b...on_V31.003.hex - Error in the link, this one works
#4972
Not Found
The requested URL /users/bryan/mods/basemaps/V31.003V31.003/BoostPill/AUS_EDM/2009_RA_AUS_EDM_BaseMap_BoostPILL_98ron_V31.003.he x was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Anyone have a copy?
The requested URL /users/bryan/mods/basemaps/V31.003V31.003/BoostPill/AUS_EDM/2009_RA_AUS_EDM_BaseMap_BoostPILL_98ron_V31.003.he x was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Anyone have a copy?
#4973
The bad news is... We never did one. There has never been an AUS/EDM base map beyond MY2011.
The good news is... I'm working on the ROM code patches required for 2012/2013 AUS/EDM right now. The general patch generation system is built and ready, and a few people are testing them in various ROMs.
Once I have the patches, I'll need to research up the AUS/EDM tables and other items.
Then, I'll finally be able to make 2012/2013 GST Base Maps.
So watch this space.
Rich
The good news is... I'm working on the ROM code patches required for 2012/2013 AUS/EDM right now. The general patch generation system is built and ready, and a few people are testing them in various ROMs.
Once I have the patches, I'll need to research up the AUS/EDM tables and other items.
Then, I'll finally be able to make 2012/2013 GST Base Maps.
So watch this space.
Rich
Am I able to use the 2013 USDM/CADM - 93 oct - StockPill - V3.1 Rom in my friends AUS Ralliarts 2013 and 2014 models?
The latest AUS rom I can see is 2011 AUS/EDM - 98 ron - StockPill - V3.1
Thanks again.
Last edited by mattymoo; Aug 8, 2016 at 06:44 AM.
#4974
Evolved Member
Thanks Rich, I noticed a few things got updated, but still not an AUS rom?
Am I able to use the 2013 USDM/CADM - 93 oct - StockPill - V3.1 Rom in my friends AUS Ralliarts 2013 and 2014 models?
The latest AUS rom I can see is 2011 AUS/EDM - 98 ron - StockPill - V3.1
Thanks again.
Am I able to use the 2013 USDM/CADM - 93 oct - StockPill - V3.1 Rom in my friends AUS Ralliarts 2013 and 2014 models?
The latest AUS rom I can see is 2011 AUS/EDM - 98 ron - StockPill - V3.1
Thanks again.
I do have a test version of v31.003 Base Map for AUS_EDM 2012, "58640002". So far, I've only got a "Stock Pill" version of it.
It's still at the stage of waiting for someone to trial it... someone with a 5864 prefix on their existing ROM.
And no, don't use a USDM ROM.
Rich
Edit: If someone can get me the base ROM image, I can do a trial version of 2013-14 AUS/EDM Ralliart.
#4975
Hiya.
I do have a test version of v31.003 Base Map for AUS_EDM 2012, "58640002". So far, I've only got a "Stock Pill" version of it.
It's still at the stage of waiting for someone to trial it... someone with a 5864 prefix on their existing ROM.
And no, don't use a USDM ROM.
Rich
Edit: If someone can get me the base ROM image, I can do a trial version of 2013-14 AUS/EDM Ralliart.
I do have a test version of v31.003 Base Map for AUS_EDM 2012, "58640002". So far, I've only got a "Stock Pill" version of it.
It's still at the stage of waiting for someone to trial it... someone with a 5864 prefix on their existing ROM.
And no, don't use a USDM ROM.
Rich
Edit: If someone can get me the base ROM image, I can do a trial version of 2013-14 AUS/EDM Ralliart.
I have a stock 2013 and 2014 stock aus ralliart rom, How do I send it to you?
#4976
Evolved Member
#4977
Suitable??
Can any one tell me if the "2009 AUS/EDM - 98 ron - StockPill - V3.1" map is suitable to use with a ralliart with upgraded intercooler piping and the Evo X maf housing? (No intercooler upgrade and Evo X maf housing purely to add a pod filter for intake noise).
#4979
https://www.evolutionm.net/forums/09-ralliart-how-installations/462981-how-k-n-sri-no-more-than-70-00-a.html
The pipe that the maf sits in on the ralliart air box is the same size as the Evo X maf pipe as per the above link...
Based on this I'm guessing that the map should be fine to run but I thought I'd ask the question as it states no mods at all for the base map stock pill...
The pipe that the maf sits in on the ralliart air box is the same size as the Evo X maf pipe as per the above link...
Based on this I'm guessing that the map should be fine to run but I thought I'd ask the question as it states no mods at all for the base map stock pill...