How to get S-Sport mode & Launch Control on the Ralliart
#31
Evolved Member
iTrader: (7)
Join Date: Sep 2010
Location: 805-Conejo Valley
Posts: 2,558
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone recognize these:
http://89.252.58.233/ps/MUT%20-%203/...ASTER/CFF_SST/
http://89.252.58.233/ps/MUT%20-%203/...ASTER/CFF_SST/
#41
Evolving Member
iTrader: (2)
Instructions are spot on!
Just an FYI, this didn't affect my tune. After disconnecting the MUT-3, I attempted to reflash my ECU to my custom tune and Ecuflash reported an identical ROM already installed.
Finally, borrowed MUT-3. I don't own one or the software.
Just an FYI, this didn't affect my tune. After disconnecting the MUT-3, I attempted to reflash my ECU to my custom tune and Ecuflash reported an identical ROM already installed.
Finally, borrowed MUT-3. I don't own one or the software.
Last edited by omegis; Sep 5, 2012 at 06:03 PM.
#42
Evolved Member
Side note: If your ROM ID starts with "5361....", any 5361 ROM will happily work on it. So you can update to the most recent known Mitsu AUDM ROM, namely 53610013.
And I believe Beeble's guinea-pig RA was 53610013. That launched, apparently.
Rich
PS. It's still early days on this, so learn to live with some grey areas for a while. Just post what you find out, and we'll build up a decent picture. Pity it'll be spread across three forums and 4-5 threads, lol. But we'll get there in the end.
#43
Evolved Member
iTrader: (8)
Join Date: Apr 2003
Location: Georgia
Posts: 2,138
Likes: 0
Received 0 Likes
on
0 Posts
OK, I am getting access to a official MUT3 next saturday here in georgia via a friend who has worked at many mitsu dealers.. He is not sure if the IBM tablet they use has a cdrom... anyone know if we can pull the required file off any "local" drive (like a usb drive) or does it have to be a drive registered as a cdrom drive?????????