would this work?
at first i was thinking of running two ecus (evo viii and stock)
but i guess it was too much of a hassle.

any suggestions? and thnx a lot. =)

 

That's a hulluva question. I couldn't say with absolute certainty if it would work. Does anyone have an Evo VII FSM or know where one can be downloaded from? It sounds plausible that it would work. You'd have to find out if both transmissions have the same style sensors and what pins they go to on the ECU harness.

 

heres a link from lancerregister.
credits go to nads1978

 

Nice link!

Ok, here's what I've found. The auto Lancer and Evo VII GT-A have the same ECU harness connectors. When comparing pinouts between the two I was unable to find any differences, at a quick glance. I'm thinking it's a feasible swap at this point.

 

great info senate. =)
keep us posted.

 

Sweet!

 

so i found this on ebay and saw that the evo 7 has a seperate ecu for the tranny
http://cgi.ebay.com/mitsubishi-evo-7...item2c52442c44

 

Thanks

Can you link the Lancer auto pin-outs for me please? As this will help me complete the GTA pin-out. Thanks

 

Lancer FSM, 13Ab-36

 

Maybe I'm just daft, I can't find the ECU pin-outs.

 

After you download the FSM and follow the instructions in the FSM thread to extract the FSM to your computer, you will find the ECU pinouts in Volume 1, Group 13Ab, page 36 of the FSM.

 

Nice one, thanks