Evo VII GT-A ecu on a Lancer Auto?
#1
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lake Forest, California
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Evo VII GT-A ecu on a Lancer Auto?
would this work?
at first i was thinking of running two ecus (evo viii and stock)
but i guess it was too much of a hassle.
any suggestions? and thnx a lot. =)
at first i was thinking of running two ecus (evo viii and stock)
but i guess it was too much of a hassle.
any suggestions? and thnx a lot. =)
#2
Evolved Member
iTrader: (20)
That's a hulluva question. I couldn't say with absolute certainty if it would work. Does anyone have an Evo VII FSM or know where one can be downloaded from? It sounds plausible that it would work. You'd have to find out if both transmissions have the same style sensors and what pins they go to on the ECU harness.
#3
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lake Forest, California
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
That's a hulluva question. I couldn't say with absolute certainty if it would work. Does anyone have an Evo VII FSM or know where one can be downloaded from? It sounds plausible that it would work. You'd have to find out if both transmissions have the same style sensors and what pins they go to on the ECU harness.
credits go to nads1978
Last edited by ClixT; Jan 22, 2010 at 10:06 PM.
#7
Evolved Member
iTrader: (21)
so i found this on ebay and saw that the evo 7 has a seperate ecu for the tranny
http://cgi.ebay.com/mitsubishi-evo-7...item2c52442c44
http://cgi.ebay.com/mitsubishi-evo-7...item2c52442c44
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lake Forest, California
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Lancer FSM, 13Ab-36
#11
Evolved Member
iTrader: (20)
Lancer FSM, 13Ab-36
Thread
Thread Starter
Forum
Replies
Last Post