MMC Lancer 1.8T 4WD GSR
Thread Starter
Newbie
Joined: Jul 2003
Posts: 60
Likes: 0
MMC Lancer 1.8T 4WD GSR
I have a MMC Lancer 1.8T GSR 4WD (1998 spec) in standard mode.
Due to its low milleage i have decided to do some job on it but avoiding, for the moment, any engine disassembly. In my oppinion the first step could be changing the intercooler, throttle body, inlet & exhaust modificatins, installing a blow-off valve, etc but i really want to know who could offer this aftermarket parts that can fit properly or maybe someone´s piece of advise.
thanx,
OCR
Due to its low milleage i have decided to do some job on it but avoiding, for the moment, any engine disassembly. In my oppinion the first step could be changing the intercooler, throttle body, inlet & exhaust modificatins, installing a blow-off valve, etc but i really want to know who could offer this aftermarket parts that can fit properly or maybe someone´s piece of advise.
thanx,
OCR
Your engine will respond to modifications very well. I would be turning up the boost a little, fitting a full 3" exhaust look at engine management etc, and go from there.
