1 stupid thing i have done..
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
1 stupid thing i have done..
Okay, i've just been searching underneath my car, just to check out whats happeneing, and at the last track day, i got told by the Marshall that my fire extuingisher wasn't secured tightly enough.. so in a rush to get out on the track.. i got out the tech screws and drill, and checked where everything was under the car, and just teckied it into place... have a look at this photo, this is how closei was from erupting a fuel line and brake line..
Please, if your gunna do this, make sure you put it on the passenger side car...
Please, if your gunna do this, make sure you put it on the passenger side car...
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
See the tech screw ? its actually wedged between the fuel and brake line, 1 mm to the left i brake the fuel line, 1mm to the right i brake the brake line..
The photo is underneath the drivers side seat on the bottom of the car
The photo is underneath the drivers side seat on the bottom of the car
don't feel bad.. last time i changed my oil i dropped my clutch in 1st gear while i was up on ramps. good thing i'm not lowered yet.. that's all i can say =P
oh, and you were luckier than me.... my hood is slightly bent and i have a little ding on under where the hood sits.
either way... i was still pretty lucky too
edit: for the record, i thought i was in neutral... now that's stupid
oh, and you were luckier than me.... my hood is slightly bent and i have a little ding on under where the hood sits.
either way... i was still pretty lucky too
edit: for the record, i thought i was in neutral... now that's stupid
Trending Topics
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
Originally posted by RalliArt1994
**** man thats pretty bad? dont u look b4 u screw?
**** man thats pretty bad? dont u look b4 u screw?


