Fitting a CC GSR Rear Wing onto a CC Coupe
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
I havent showed you guys this, keep meaning to since its been on the car for like 3 years, but i found a GSR rear spoiler in the local Trading Post so i bought it and got it fitted.. what do you guys think of it ? I havent seen anyone else do it before..
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
Originally posted by A73 Lancer
Looks good. Is the Coupe's boot a bit narrower than the sedan's? (looks like it overhangs the boot edges a little...)
Looks good. Is the Coupe's boot a bit narrower than the sedan's? (looks like it overhangs the boot edges a little...)
10 Points to you
You are 100% correct.. the Coupe's are slightly narrower then the sedan, and it hangs just overPete
How much did you end up paying for the Spoiler from the trading post. I bought a 95 Lancer GLX Coupe yesterday, its my first car and I'm looking to do it up a bit visually before I start with some minor power mods... What order did you do your mods in?
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
Umm, i was heavily intro car stereo, thats why i bought the car for its dynamics, but now i've sold the audio and i've started improving the handling and giving it a lil breathe..
So far, Exhaust, Kings Springs, i'm desiging a Cold Air Intake for the carby thats on it.. i'm looking into sway bars and then i'll work out the rest of the suspension in the end..
But last night i picked up a TC05 from a AB GSR Cordia.... so.... we'll see if i really wanna put it on..
So far, Exhaust, Kings Springs, i'm desiging a Cold Air Intake for the carby thats on it.. i'm looking into sway bars and then i'll work out the rest of the suspension in the end..
But last night i picked up a TC05 from a AB GSR Cordia.... so.... we'll see if i really wanna put it on..
Trending Topics
Thread Starter
Evolved Member
iTrader: (1)
Joined: Sep 2002
Posts: 1,510
Likes: 0
From: Australind, Western Australia
Muffler cost me $130 ( chrome cannon, 2.5 in 4 out), the pipe we had from another car, got it bent and put on.. so it cost me like 20 bucks for that..
I have super low king springs ( 50-60mm ) there were bout $360, and i fitted them myself too..
I have super low king springs ( 50-60mm ) there were bout $360, and i fitted them myself too..
Thread
Thread Starter
Forum
Replies
Last Post




