BakaUnchi

try the 91 octane map or the injen map

tnn35

is this:
http://www.mediafire.com/download.php?5udxyxk6gc1xk6c
2011 MR Injen ACN91.ptm stage1 or stage2 map ???

it doesn't say.

BakaUnchi

2011 STAGE 1 ALPHA STOCK, INJEN AND COSWORTH PANEL INTAKE MAPS
FOR MR ONLY[/size]

http://www.mediafire.com/?eg6qbap1koxc3

Quote:
Originally Posted by BakaUnchi
2011 STAGE 2 ALPHA INJEN AND COSWORTH PANEL INTAKE MAPS
http://www.mediafire.com/?5bupofiny2ug7

JG

Unless you have the exact requirements as specified by each map I would recommend you to take it to a tuner.......it is going to cost you almost the same and it will be so much better.....

jthompson8692

Just curious, is there a stage 1 ap map for the hks drop-in?

JG

The BETA maps will tell you what hardware changes are compatible with...... I dont think they support anything different than the stock intake......but you can check on the map itself..........Cobb is supposed to be realize the new maps sometime in Dec or Jan at the latest for the 2011's

tnn35

I'm searching for a local tuner/shop in my area who can do cobb tuning. Results = NONE. I really like the AP and would like to keep this option because the ability to do data logging and switching maps.

Yes I can go ecuflash. At least 3 shops within 30miles can do the tune for me.

I'm currently running stage2 injen map, it seems to be a bit less power on high RPM but yes the AFR seems to be about right. low boost = 12:1, mid boost = 11-> 11.5 and high boost is some where between 10-11

I should be patiently waiting for coob to release more intake maps.

wallace989

question cobb downpipe has two holes for sensors what do u use to plug off the extra one?

JG

So that you have the option of installing a AFR sensor or a O2 sensor simulator/corrector

turbosuckout

nvm...

BoostinEv0

iTrader: (1)

question.

STOCK 2010 MR - want to replace filter with a cosworth filter... run Stage 1 map on the cobb ap.. or is there a specific map I can use? for a stock 2010 mr + cosworth panel filter..?

tnn35

hmm this thread is for 2011. I'm sure there is more maps available for your 2010 MR.

skrappyyy

Can I use the stage two map with all the required mods minus the downpipe?

JG

Try it if you want .... and see how it runs...... but go the extra mile and get the downpipe ASAP

tnn35

hi BakaUnchi

will cobb release more intake maps for stage 2 soon? It's been near 4months since you released alpha maps.

I'm searching for local tuner who can do cobb tuning but out of 3 guys all said: flash ecu....