fastest stock bottom end evo?
Thread Starter
Former Sponsor
iTrader: (22)
Joined: Jun 2005
Posts: 863
Likes: 4
From: Rochester, NY
fastest stock bottom end evo?
what is the fastest stock bottom end evo? and whats done to it?
we have gone 11.1@131 and want to see how much more it will take!
Emery
we have gone 11.1@131 and want to see how much more it will take!
Emery
Evolved Member
Joined: Jun 2004
Posts: 2,552
Likes: 1
From: KL,Malaysia
Devo Tuning is the holder for ET while you are MPH holder.But,Trinababe do a lot of preparation and he shold took down 2 record.Devo Tuning EVO 8 have custom SC61,HKS 272 Cam,Winter tire,Autronic,4.8 FD and all the usal stuff.He can hit 10.6 if he use 4.11 FD.This record was set back in 04.
.
Trending Topics
I dont think too many people are cheap enough to keep thier stock motor when running as fast as we are 
Yes my pos used to run 11.10s at 129s.. the ignition would never take high boost so I dont know what it could have done. I will most likely be building it now though for a bigger turbo and new fuel.
Yes my pos used to run 11.10s at 129s.. the ignition would never take high boost so I dont know what it could have done. I will most likely be building it now though for a bigger turbo and new fuel.
Thread Starter
Former Sponsor
iTrader: (22)
Joined: Jun 2005
Posts: 863
Likes: 4
From: Rochester, NY
Originally Posted by TrinaBabe
I dont think too many people are cheap enough to keep thier stock motor when running as fast as we are
Yes my pos used to run 11.10s at 129s.. the ignition would never take high boost so I dont know what it could have done. I will most likely be building it now though for a bigger turbo and new fuel.
Yes my pos used to run 11.10s at 129s.. the ignition would never take high boost so I dont know what it could have done. I will most likely be building it now though for a bigger turbo and new fuel.
my ignition is fine up to 29 lbs so far and not showing any sings of weeknes. all i have is a dli, and like four grounds going to the head streight from the batt. and gap is about .024.
Evolved Member
Joined: Jun 2004
Posts: 2,552
Likes: 1
From: KL,Malaysia
Originally Posted by xspsi4
Plus adam has to be one of the best drivers out there.
!!But shifting into 5th is holding him,right
??TTP did 11.2@127MPH on stock turbo,no nitrous
!!The secret is cam timing.
Originally Posted by Ang Wen Yan
Can't argree more!!But shifting into 5th is holding him,right??TTP did 11.2@127MPH on stock turbo,no nitrous!!The secret is cam timing.
!!But shifting into 5th is holding him,right??TTP did 11.2@127MPH on stock turbo,no nitrous!!The secret is cam timing.I'm cheap enough to run that fast on stock block, watch me. I have no plans on upgrading my bottum end until i blow the thing up. Ignition, head, every bolt on, sure... No motor swap for me though.
Evolving Member
Joined: Sep 2003
Posts: 196
Likes: 0
From: OKC
Originally Posted by 4g63girl
my ignition is fine up to 29 lbs so far and not showing any sings of weeknes. all i have is a dli, and like four grounds going to the head streight from the batt. and gap is about .024.
Thread Starter
Former Sponsor
iTrader: (22)
Joined: Jun 2005
Posts: 863
Likes: 4
From: Rochester, NY
Originally Posted by diambo4life
Have you thought about running a DSM ignition? They work better than your stock EVO stuff you know. I have 2 local buddies (11 sec EVOs) who converted and they have been happy with the results so far.
i have no reason to change it at this point! this set up works fine for me at this point.
