JCT/ERE Evo 5 makes 10.2
JCT/ERE Evo 5 makes 10.2 with Vids
ERE Racing Evo 5 driven by Jonathan Tiu makes 10.2! Vids filmed at different location in the Philippines
Article below
http://www.pdrf.com.ph/Toprace0320.php
Remember, this is only a 500whp (definitely not even more than 600) Evo 5.
Vid of the Evo 5 in action
http://www.youtube.com/watch?v=MVZZftD98tc
This vid is really cool. The Evo did not let go a few seconds and gave the Civic a good start, but at the end, watch who will prevail
http://www.youtube.com/watch?v=ULnZw9Xm0nw
Another Honda given the advantage
http://www.youtube.com/watch?v=mv-iA3Z_OMs
A 10.5 run. If you will notice, this was done on a REAL STREET that we closed down just for this race (do not worry mods, this was sanctioned by the local government). Therefore, no VHT and on street tires running a 10.5, Philippine tropical climate. What more if this was brought to a real strip. FYI, there is really no proper dragstrips here.
http://www.youtube.com/watch?v=BNcBI2hicJw
http://www.youtube.com/watch?v=dvIVSb3JavQ
Article below
http://www.pdrf.com.ph/Toprace0320.php
Remember, this is only a 500whp (definitely not even more than 600) Evo 5.
Vid of the Evo 5 in action
http://www.youtube.com/watch?v=MVZZftD98tc
This vid is really cool. The Evo did not let go a few seconds and gave the Civic a good start, but at the end, watch who will prevail
http://www.youtube.com/watch?v=ULnZw9Xm0nw
Another Honda given the advantage
http://www.youtube.com/watch?v=mv-iA3Z_OMs
A 10.5 run. If you will notice, this was done on a REAL STREET that we closed down just for this race (do not worry mods, this was sanctioned by the local government). Therefore, no VHT and on street tires running a 10.5, Philippine tropical climate. What more if this was brought to a real strip. FYI, there is really no proper dragstrips here.
http://www.youtube.com/watch?v=BNcBI2hicJw
http://www.youtube.com/watch?v=dvIVSb3JavQ
Last edited by rawandbruteEVO; Jun 9, 2007 at 01:21 AM.
Nope. But I know sina Vanni, John, Mato, Fuji, etc. I would see Blanche Racing in the contests, but they are not as dominant anymore. They barely hit the dynos unlike ERE, H3, Matonetics, DGL, Autoplus, Vannitek, etc.
Vanni of Gaspeed? i know him too from Las pinas! where do u get your parts? i have evo 8 runs 12.4 93 octane no meth or nos(street tire). my mods are in my sigs bellow. its at the shop now. im in a market of parts right now.
Yes Vanni. He is now Vannitek / Staging Lane. They also go to Autoplus to dyno. I ordered mine from creative speed in Japan, installed at HP Racing, and tuned at Autoplus. Vanni has one of the best RT here, well not as good as John Tiu's and Fuji based in Pampanga. I think they know hold the record of the fastest all motor Honda here. What I know is that thewy broke in the 10s in an all-motor Honda. Blanche was making 12s only at BRC.
Trending Topics
hmm...dami na pala malupit jan ha! the last time i was there 2002 pa. I raced at the Samsung Race and Rave with Blanche. I have an old video at youtube look for evovin. Stock pa yun. bog down at launching coz of my 2 step rev limit was only 5000rpm. Stock street tire with 17 inch rims kaya nag bog down.
Wala bro. Panay Evo mo. Well before, Autoplus was dominating. Now mautak lahat. Nagpapa dyno at tune na sa Autoplus. What I am waiting for though is the run of the 1000hp GTR ng Autoplus.
http://www.youtube.com/watch?v=_c2hnmZHSw0 binabasa pa yung burning out area dito kaya wheel spin me when i laucnhed!
i have a new one but its not up yet...i ran against subaru STi, mustang cobra, pontiac gto.
autoplus.They have all wheel dyno?
i have a new one but its not up yet...i ran against subaru STi, mustang cobra, pontiac gto.autoplus.They have all wheel dyno?
^ also that run was completely stock except for turbo back exhaust. no tune. but now i got tune and i can tell the difference!
Ok sana dito ang parts pero ang labor ang mahal! palagay ng clucth dito labors fee is $450-600. its like 20,000 to 30000 pesos!
i remember nung dun ako kila Jon(Blanche) konting kalikot big mac meal sa macdo ok na!
lol
Ok sana dito ang parts pero ang labor ang mahal! palagay ng clucth dito labors fee is $450-600. its like 20,000 to 30000 pesos!
i remember nung dun ako kila Jon(Blanche) konting kalikot big mac meal sa macdo ok na!
lol
http://www.youtube.com/watch?v=_c2hnmZHSw0 binabasa pa yung burning out area dito kaya wheel spin me when i laucnhed!
i have a new one but its not up yet...i ran against subaru STi, mustang cobra, pontiac gto.
autoplus.They have all wheel dyno?
i have a new one but its not up yet...i ran against subaru STi, mustang cobra, pontiac gto.autoplus.They have all wheel dyno?
the only thing i notice pala is....here 10 sec is not that far to get plus we are running full interior and aircon and power steering. there i remember 14 sec hubo't hubad na mga honda!
what gas are u running? u have meth or nos?

what gas are u running? u have meth or nos?
Sabi nila that the Autoplus Skyline, if brought to the US, can make 8.9 lower, since it uses the same specs as the 8.2 R33 in Australia built by Jun and Croydon. They havnt dragged it ren since baka di kumapit. What I know is that if the Skyline does not run here properly due to tractions, it may be sent to the US just to run down the strip and set records.
My gas? I am on pure pump 96 octane petron blaze.
Thread
Thread Starter
Forum
Replies
Last Post
mitsuboost30
Northeast Region
11
Apr 9, 2008 07:24 PM




