Just reved it up to 6k and slipped out the clutch (exedy twin disk). It was a little tough to shift, look at the tach, steer, and hold the camera at the same time so it was a little shakey.

http://www.youtube.com/watch?v=sR3pz7g6gPQ

 

Please next time have someone tape for you that is so unsafe.


Anyways, didn't seem like a bad launch, Do you have 2-Step?

 

It wasn't unsafe. The camera was in my left hand as I drove normally. It took a few tries, before I made a pass where the camera maintained a good view of the tach and speedo.

My launch control is at 6k, but my best 60' times come when I launch without it.

 

that video was very informative thank you! I like how you reved up to your launch point. I need to release a lot faster. I went to the track and ran my first 1/4 mi yesterday (i've done 1/8 a few times & burned my clutch up slipping it like a granny). My times were horrible, but I would not launch this time. Looking back at some loggs, I noticed some small knock around 6k and that I was shifting out of my power band. More rpms was not better and I have to launch for decent times.

 

nice video, next time just have someone hold it for you

 

Just go a new clutch in mine, cant wait to take it to the track and see how it does.

 

glare killed part of it but nice job

 

amazing

 

Yeah, the glare screws it up a lttle, but you can tell from the rpms and shift points where I'm at in terms of MPH. 60MPH comes at the 2-3 shift.

I have another video under my youtube username where I mounted the camera on the steering column, and that clip is nice and stable. Unfortunately, it wasn't in the Evo.