Question of Piper Race cams, Pistons and Flash
Question of Piper Race cams, Pistons and Flash
AL,
I have a few questions on cams, I am putting together a Stroker and will be using Dave's pistons, what cams were you running when you ran into the clearance problems. I am going to run the Piper Race Hydraulic Cams, they are 272 advertised duration and 12mm lift. Do you have any experience with these cams? If so how do they idle on a Flash. I am doing a BR stroker, BR GT35r, and the cams to go with the BR head I have. The plan is to run a custom Flash to see how fast I can go on the MAF before switching to AEM. I am putting in a cage to be able to run faster then 11.50. I would like to test the limits of the MAF before moving to the AEM.
BTW, ran an 11.64 @ 112 on your Flash letting off the gas at 1000' to avoid getting booted.
I have a few questions on cams, I am putting together a Stroker and will be using Dave's pistons, what cams were you running when you ran into the clearance problems. I am going to run the Piper Race Hydraulic Cams, they are 272 advertised duration and 12mm lift. Do you have any experience with these cams? If so how do they idle on a Flash. I am doing a BR stroker, BR GT35r, and the cams to go with the BR head I have. The plan is to run a custom Flash to see how fast I can go on the MAF before switching to AEM. I am putting in a cage to be able to run faster then 11.50. I would like to test the limits of the MAF before moving to the AEM.
BTW, ran an 11.64 @ 112 on your Flash letting off the gas at 1000' to avoid getting booted.
Originally Posted by 4ringturncoat
AL,
I have a few questions on cams, I am putting together a Stroker and will be using Dave's pistons, what cams were you running when you ran into the clearance problems. I am going to run the Piper Race Hydraulic Cams, they are 272 advertised duration and 12mm lift. Do you have any experience with these cams? If so how do they idle on a Flash. I am doing a BR stroker, BR GT35r, and the cams to go with the BR head I have. The plan is to run a custom Flash to see how fast I can go on the MAF before switching to AEM. I am putting in a cage to be able to run faster then 11.50. I would like to test the limits of the MAF before moving to the AEM.
BTW, ran an 11.64 @ 112 on your Flash letting off the gas at 1000' to avoid getting booted.
I have a few questions on cams, I am putting together a Stroker and will be using Dave's pistons, what cams were you running when you ran into the clearance problems. I am going to run the Piper Race Hydraulic Cams, they are 272 advertised duration and 12mm lift. Do you have any experience with these cams? If so how do they idle on a Flash. I am doing a BR stroker, BR GT35r, and the cams to go with the BR head I have. The plan is to run a custom Flash to see how fast I can go on the MAF before switching to AEM. I am putting in a cage to be able to run faster then 11.50. I would like to test the limits of the MAF before moving to the AEM.
BTW, ran an 11.64 @ 112 on your Flash letting off the gas at 1000' to avoid getting booted.
I think the limits of the maf are very high !
Thread
Thread Starter
Forum
Replies
Last Post
DynoFlash
Evo Engine / Turbo / Drivetrain
48
May 16, 2008 09:55 AM
David Buschur
Evo Engine / Turbo / Drivetrain
129
Apr 30, 2008 02:28 AM
RALLIART/LANCER
Evo Engine / Turbo / Drivetrain
61
Sep 27, 2006 12:45 PM