Notices
DynoFlash [Visit Site]

boost

Old Sep 18, 2004 | 04:52 PM
  #1  
brandon's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Sep 2003
Posts: 362
Likes: 0
From: Roanoke
boost

--------------------------------------------------------------------------------

Hey guys need your opinons on my boost.
ok i have an hks cat back, hks dp, monster sport drop in filter, dynoflash and a halman mbc and a blitz dual turbo timer with boost gauge. My boost is very in consisent well it stays the same but in each gear it's differnt.

for example
1st = 1.32
2nd = 1.34
3rd = 1.38
4th = 1.44
5th = 1.47 and after hits peak it holds and then drops about .1 and I do beleive i have the setup the way al told me. Is this normal or is somthing wrong? and if it's wrong do you think by replacing the blow off valve to the mr version would that help.
thanks
Reply
Old Sep 18, 2004 | 05:44 PM
  #2  
merc300's Avatar
Account Disabled
iTrader: (1)
 
Joined: May 2004
Posts: 64
Likes: 0
From: saint pete FL
mine goes to 1.5 every gear falls to 1.48 ive got the mr diverter too
Reply
Old Sep 18, 2004 | 09:32 PM
  #3  
DynoFlash's Avatar
Account Disabled
iTrader: (91)
 
Joined: Sep 2003
Posts: 16,850
Likes: 0
From: 2003 Evo VIII - Silver
It is normal to see a differnt boost in each gear with the MBC - what we don't like to see is if the boost varies a lot falling down in the same gear as you go through the revs. The Hallamn usually is very good at keeping a very steady boost

You seem to have the boost set just about ideal
Reply
Old Sep 19, 2004 | 01:16 PM
  #4  
brandon's Avatar
Thread Starter
Evolving Member
iTrader: (5)
 
Joined: Sep 2003
Posts: 362
Likes: 0
From: Roanoke
awsome just wanted to varify it.
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 02:33 AM.