Ecuflash Error
Thread Starter
Registered User
Joined: Nov 2007
Posts: 1,507
Likes: 2
From: Trinidad
Ecuflash Error
i have an 06 JDM Evo IX. when i connect to Ecuflash it is not working for some reason!
an error message comes up, and the log says:
is it possible my ECU is "locked"?
Please advise. Thanks in advance.
an error message comes up, and the log says:
[13:10:16.484] Version 1.34.1435
[13:10:16.484] 11 memory models read.
[13:10:16.484] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[13:10:21.046] 242 ROM metadata models scanned.
[13:10:21.046] checksum module "subarudbw" loaded.
[13:10:21.046] flashing tool "wrx02" loaded.
[13:10:21.046] flashing tool "wrx04" loaded.
[13:10:21.046] flashing tool "sti04" loaded.
[13:10:21.046] flashing tool "sti05" loaded.
[13:10:21.046] flashing tool "mitsukernel" loaded.
[13:10:21.046] flashing tool "mitsukernelocp" loaded.
[13:10:21.046] flashing tool "shbootmode" loaded.
[13:10:52.968] Using interface OpenPort 1.3 Universal TX27NF9#176335d59c761ad1529e421a7bf6b516833b07fa
[13:11:01.656] sending init sequence 1 (0001)
[13:11:04.875] sending init sequence 1 (0003)
[13:11:08.109] sending init sequence 1 (FFFF)
[13:11:11.359] sending init sequence 1 (F0F0)
[13:11:14.093] no response to any known code
[13:11:14.093] interface close
[13:10:16.484] 11 memory models read.
[13:10:16.484] scanning for metadata models in C:/Program Files/OpenECU/EcuFlash/rommetadata
[13:10:21.046] 242 ROM metadata models scanned.
[13:10:21.046] checksum module "subarudbw" loaded.
[13:10:21.046] flashing tool "wrx02" loaded.
[13:10:21.046] flashing tool "wrx04" loaded.
[13:10:21.046] flashing tool "sti04" loaded.
[13:10:21.046] flashing tool "sti05" loaded.
[13:10:21.046] flashing tool "mitsukernel" loaded.
[13:10:21.046] flashing tool "mitsukernelocp" loaded.
[13:10:21.046] flashing tool "shbootmode" loaded.
[13:10:52.968] Using interface OpenPort 1.3 Universal TX27NF9#176335d59c761ad1529e421a7bf6b516833b07fa
[13:11:01.656] sending init sequence 1 (0001)
[13:11:04.875] sending init sequence 1 (0003)
[13:11:08.109] sending init sequence 1 (FFFF)
[13:11:11.359] sending init sequence 1 (F0F0)
[13:11:14.093] no response to any known code
[13:11:14.093] interface close
Please advise. Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
jmcmill3
ECU Flash
2
Nov 22, 2009 12:13 PM
