Trouble starting after injector install and tune! HELP
Trouble starting after injector install and tune! HELP
Hey people, need some insight on what can be casuing my car to have some problems when I try to start when its cold? I had cams and a few other parts installed with a retune but my tuner is a little far away. I know he sacled pte 880s at 812 but I am thinking the cranking enrichment table needs to be adjusted at a cooler temp setting. Anybody have an idea of what they should be minimized to? The car seems to be too rich cause I need to give it some throttle on the second crank to get it to turn over. Its not a consistent problem but it needs attention. I am curious to know if I changed the injector scaling would it throw my fuel maps off.
Hey people, need some insight on what can be casuing my car to have some problems when I try to start when its cold? I had cams and a few other parts installed with a retune but my tuner is a little far away. I know he sacled pte 880s at 812 but I am thinking the cranking enrichment table needs to be adjusted at a cooler temp setting. Anybody have an idea of what they should be minimized to? The car seems to be too rich cause I need to give it some throttle on the second crank to get it to turn over. Its not a consistent problem but it needs attention. I am curious to know if I changed the injector scaling would it throw my fuel maps off.
For example say you have 880's right?
Origional scaling for the 560's was 513
New scaling for the 880's is around 750
513/750 = 68.4%
Multiply all the values except the very last ones by 0.684 and see if problems is improved
Thread
Thread Starter
Forum
Replies
Last Post
Hotsauce101
Evo General
2
Nov 18, 2015 11:35 AM
scheides
Evo X Engine / Turbo / Drivetrain
2
May 28, 2015 12:01 PM




