Logging LC 1 throught std evo 8 ecu (JDM)
Logging LC 1 throught std evo 8 ecu (JDM)
Hi guys, I need some help and yes I have searched!
2004 JDM Evo 8 with 3 plug ecu
Which pin do I put my 0-5V analog output from LC1 to 73 or 92/93
What Mut request do I log MUT12 or MUT3C and what is the hex I need to enter
Thanks
Phil
2004 JDM Evo 8 with 3 plug ecu
Which pin do I put my 0-5V analog output from LC1 to 73 or 92/93
What Mut request do I log MUT12 or MUT3C and what is the hex I need to enter
Thanks
Phil
This is what i got in case any one with a 3 plug JDM ecu wants a quick answer
Pin 73
Mut 3C
my lc 1 is set to 8.98 = 0v and 16.99 = 5v (9 to 17 AFR)
evoscan formula is 0.03141*x+8.98 or (16.99-8.98)/255*x+8.98
hope this helps you all out
Phil
Pin 73
Mut 3C
my lc 1 is set to 8.98 = 0v and 16.99 = 5v (9 to 17 AFR)
evoscan formula is 0.03141*x+8.98 or (16.99-8.98)/255*x+8.98
hope this helps you all out
Phil
Last edited by philr8; May 16, 2010 at 03:21 AM.
Thread
Thread Starter
Forum
Replies
Last Post
tlcoll1
General Engine Management / Tuning Forum
18
Jan 5, 2007 01:40 PM
