Notices
ECU Flash

Rich Idle and no Fuel trims

Thread Tools
 
Search this Thread
 
Old Jul 17, 2010 | 10:45 AM
  #1  
tigerkill2007's Avatar
Thread Starter
Newbie
iTrader: (2)
 
Joined: Dec 2008
Posts: 93
Likes: 0
From: Wisconsin
Rich Idle and no Fuel trims

My car is running rich after i took out the intake manifold and exhaust manifold...it would start off at about 14.7 and slowly get richer until it gets to 10.0...Right now the car isn't logging any fuel trims at all not even the stft either...everything seems to be hooked up...I don't know what else it can be...any help would be appreciated
Reply
Old Jul 21, 2010 | 05:29 PM
  #2  
pqek666's Avatar
Newbie
15 Year Member
 
Joined: Dec 2008
Posts: 44
Likes: 2
From: South Florida
hi... do you know what was the problem???

I have the same problem with my car, but in my car everything seems to be fine, the idle is about 12:1, I have no STFT MTFT LTFT, all of them are on 0.0108%...

what can be?
Reply
Old Jul 22, 2010 | 10:55 AM
  #3  
Oracle1's Avatar
Evolving Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 425
Likes: 0
too rich or to lean can cause this from what I have experienced.
Reply
Old Jul 23, 2010 | 11:20 AM
  #4  
Jorge T's Avatar
Evolved Member
iTrader: (18)
 
Joined: May 2004
Posts: 1,494
Likes: 1
From: Houston, TX
Have you guys change roms IDs from what came stock? or 1 or both sensors O2 may be turned off in your periphery.
Reply




All times are GMT -7. The time now is 07:14 AM.