I have been running Power FC for 6 months and now I would like to go back to stock ECU and below is what I got whe I tried to read from rom.
I dont remember my rom ID So any way to notice ? my friend has an evo 2003 GSR
Any input would be appreciated!!

[00:03:55.686] EcuFlash Version 1.42.2595
[00:03:55.686] OS Version Windows Vista
[00:03:55.686] Qt Version 4.5.0
[00:03:55.706] 56 memory models read.
[00:03:55.706] scanning for metadata models in C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata
[00:04:01.173] 343 ROM metadata models scanned.
[00:04:01.173] checksum module "subarudbw" loaded.
[00:04:01.173] checksum module "mitsucan" loaded.
[00:04:01.174] flashing tool "wrx02" loaded.
[00:04:01.174] flashing tool "wrx04" loaded.
[00:04:01.175] flashing tool "sti04" loaded.
[00:04:01.176] flashing tool "sti05" loaded.
[00:04:01.176] flashing tool "mitsukernel" loaded.
[00:04:01.176] flashing tool "mitsukernelocp" loaded.
[00:04:01.176] flashing tool "mitsubootloader" loaded.
[00:04:01.177] flashing tool "shbootmode" loaded.
[00:04:01.199] flashing tool "shaudmode" loaded.
[00:04:01.199] flashing tool "subarucan" loaded.
[00:04:01.200] flashing tool "mitsucan" loaded.
[00:05:53.151] Using interface OpenPort 1.3 Universal TX2ASVR05c3a3ff139dbf10dfded3338a3749d27cea89403
[00:05:56.406] sending init sequence 1 (0001)
[00:05:59.638] sending init sequence 1 (0003)
[00:06:02.869] sending init sequence 1 (FFFF)
[00:06:05.599] no response to any known code
[00:06:05.599] interface close
[00:07:51.744] Using interface OpenPort 1.3 Universal TX2ASVR05c3a3ff139dbf10dfded3338a3749d27cea89403
[00:07:54.366] sending init sequence 1 (0001)
[00:07:57.598] sending init sequence 1 (0003)
[00:08:00.830] sending init sequence 1 (FFFF)
[00:08:03.560] no response to any known code
[00:08:03.560] interface close
[00:08:17.421] Using interface OpenPort 1.3 Universal TX2ASVR05c3a3ff139dbf10dfded3338a3749d27cea89403
[00:08:21.449] sending init sequence 1 (0001)
[00:08:24.681] sending init sequence 1 (0003)
[00:08:27.913] sending init sequence 1 (FFFF)
[00:08:30.643] no response to any known code
[00:08:30.643] interface close
__________________

 

Which cable are you using? Have you connected up both the OBD port and the flash port?

 

Are you just returning everything to stock?
If you don't remember your romID, just use one of the Tephramod Roms for your car year.

 

I use Tactrix 1.3U cable and yes I did connect to flash and OBD II connectors

 

Perhaps try reading while you have the unlocker running. If that doesn't work, give another version of ecuflash a try. I have to use 1.29a to get my 8 to work. You can find lots of old versions of ecuflash at http://code.google.com/p/ecurom/sour...ols%2FEcuFlash

Have you tried any other tools? Evoscan or MitsuLogger?

 

I have not try evoscan yet But I will try it tonight

Thank you for suggestion, I will let you know how it goes!

 

Found this thread and was curious if you had any success? Any update? My EcuFlash is showing the exact text from your original post. Must think alike, you tried 3 times before you stopped, which is exactly how many times I tried Lol

 

Newbie input, but i was experiencing problems due to low battery....