So... At this point, you may have seen 1 or of my other threads regarding issues with tuning my car. I'm starting to think my issues are all stemming from a poorly tuned SD setup. Since I have no way of hooking my MAF back up to my car, can someone help me through getting my SD dialed in?

I've read the "How to tune an evo 8 with SD... " thread, as well as the 3D SD thread, but I think both threads imply you're starting on a car which has a MAF still.

- For me, this is not the case. Nor, do I have a good tune from before the build. My last motor popped and I refuse to use any part of the last guy's tune. So, I'm starting from scratch here.

Can someone help me through this please?

 

Nobody?

 

You don't need a maf tune to start tuning sd,if you need a start up sd rom i can provide u one to get you going and give you a good starting point,let me know

 

If you follow the thread you say you have read, you can get it done. Just start with map-ve equal, select an rpm ve, say 77-92-77 smoothed, and tweak on from there. Put a decently safe timing map in it, and start tuning. It's not a super quick process, will take a few days/weeks of driving around tweaking to perfect it.