Hey guys, so I'm new to ECUflash and today I picked up a Tactrix cable from somebody... I went to pull the file from my ECU and I keep getting this error... I'll post what it says, and maybe somebody can help me make sense of it. Thanks in advance guys

Tried taking this test with my 2013 Evo X GSR with Tactrix 2.0 cable using the latest veriosn of ECUflash.

[19:11:37.641] -- connecting to kernel --
[19:11:37.641] kernel get version
[19:11:37.647] kernel version is : OpenECU Mitsubishi M32186 CAN Kernel V1.09
[19:11:37.647] reading kernel comm buffer size
[19:11:37.651] comm buffer size set to 1024
[19:11:37.651] reading kernel flash buffer size
[19:11:37.656] flash buffer size set to 4096
[19:11:37.669] -- dumping ECU memory --
[19:11:37.681] kernel read area: addr: 00000000 len: 0400
[19:11:37.726] invalid / no kernel response to read
[19:11:37.726] kernel read area: addr: 00000000 len: 0400
[19:11:37.772] invalid / no kernel response to read
[19:11:37.772] kernel read area: addr: 00000000 len: 0400
[19:11:37.817] invalid / no kernel response to read
[19:11:37.817] ECU memory read failure.
[19:11:37.817] can't read image.
[19:11:37.817] -- unloading kernel --
[19:11:37.817] kernel reset
[19:11:39.926] -- unlocking ECU --
[19:11:39.926] starting session...
[19:11:39.934] requesting seed...
[19:11:39.943] sending key...
[19:11:41.282] -- resetting ECU --
[19:11:42.704] -- reading ECU ID --
[19:11:42.832] ECU HW part number : xxxxx
[19:11:42.852] ECU SW part number : xxxxx
[19:11:42.867] VIN : xxxxxxx
[19:11:42.887] interface close
[19:11:42.903] interface close



[19:12:33.657] using metadata XML ID read_mitsum32186f8can from file C:/Program Files (x86)/OpenECU/EcuFlash/rommetadata/read templates/read_mitsum32186f8can.xml
[19:12:33.686] J2534 API Version: 04.04
[19:12:33.686] J2534 DLL Version: 1.00.3721 Jan 9 2013 17:24:59
[19:12:33.686] Device Firmware Version: 1.12.3688
[19:12:33.686] Device Serial Number: xxxxx
[19:12:36.320] -- loading kernel --
[19:12:36.320] -- connecting to kernel --
[19:12:36.320] kernel get version
[19:12:36.652] ECU HW part number : xxxx
[19:12:36.672] ECU SW part number : xxxxxxxxx
[19:12:36.687] VIN : xxxxxxxx
[19:12:36.704] -- unlocking ECU --
[19:12:36.704] starting session...
[19:12:37.035] requesting seed...
[19:12:42.037] interface close
[19:12:43.064] interface close

 

Looks like I'm "bricked" out of my ECU, I tried reading it several times.. oops.