Hi All,
I was data logging my AU spec 2012 Evo X MR(TCSST) with a TBE and a 3Port. But I seem to find that a Huge chunk of data is missing.
The log jumps from 2.6sec @ 2210RPM to 6.45sec@5375RPM.
All data between is not logged. Its as if there is a lag in the software or the tactrix cable.
I was using a OBD2 to log it on EVO scan 2.9.
This is all being done on the street and not on a dyno.

I have attached the Log sheet in a PDF format.
Please help me understand to why this is happening?

Thanks in advance.
Again please forgive me if I have posted this in the wrong section of the forum.

 

your in the evo "non X" forum... you know... just fyi..
but this is where all the good info is... hahah...


anyway,


its your hard drive cutting off brother!
its a safety thing due to the vibration.

Active Protection Settings is where its at on my windows 8 machine.
disable it when doing pulls

 

Sorry Mate!

Will repost it in the EVO X section.

Thank you for your help. I will try it tonight and keep you updated.