Anybody had issues datalogging with evoscan? When im logging, the connection keeps going from green, yellow and back to green. As a result, there are plenty of missing data in my datalog.

Im using OP 2.0 and Evoscan 2.9. I had logged Evo X before this with no issue.

 

I'm experiencing same on my EVO 8... I'm using OP 1.3u and latest EvoScan

 

Can you Read your Ecu with Ecuflash?

 

the only thing I can think of is either:

1: The obd port on the vehicle has damage at the pins and,
2: the tactrix cable has something wrong with it, specially if you have logged with it before, check the connectors and blow on them to clean them of any dirt and try to relog.

 

Try a new cable. The mini USB 2.0 cables are delicate.

 

Or if you have got the cable cought on your feet the socket for the cable is sensitive also

 

I had this issue -- it was the USB plug side on the EvoScan cable.

Take an old keyboard/mouse and cut the end off, cut the end off the EvoScan cable and match colour to colour (there should be 4, green red black white IIRC) solder/crimp, tape up and go go go