Problem in data logging au evo x mr - data missing
#1
Newbie
Thread Starter
Problem in data logging au evo x mr - data missing
Hi All,
I was data logging my AU spec 2012 Evo X MR(TCSST) with a TBE and a 3Port. But I seem to find that a Huge chunk of data is missing.
The log jumps from 2.6sec @ 2210RPM to 6.45sec@5375RPM.
All data between is not logged. Its as if there is a lag in the software or the tactrix cable.
I was using a OBD2 to log it on EVO scan 2.9.
This is all being done on the street and not on a dyno.
I have attached the Log sheet in a PDF format.
Please help me understand to why this is happening?
Thanks in advance.
I was data logging my AU spec 2012 Evo X MR(TCSST) with a TBE and a 3Port. But I seem to find that a Huge chunk of data is missing.
The log jumps from 2.6sec @ 2210RPM to 6.45sec@5375RPM.
All data between is not logged. Its as if there is a lag in the software or the tactrix cable.
I was using a OBD2 to log it on EVO scan 2.9.
This is all being done on the street and not on a dyno.
I have attached the Log sheet in a PDF format.
Please help me understand to why this is happening?
Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
EriCS
General Engine Management / Tuning Forum
3
Sep 6, 2013 06:34 AM