is there any way to deremine by Maf reading the amount of air ?

my Maf peaks 2600 Hz at ~28 psi and just curious, if it is possible to know how much air does the turbo flow

 

Check v7 thread. It's a tephra mod option but the topic has been covered a few times in other maf threads. I'll look later too as in curious how to change the load axis to g/s or lb min

 

Load/95 is G/s on a properly calibrated MAF.

I did all that math when EvoScan was still V0.9, I will have to see if I still have all the conversion stuff from g/s to lbs/min. I remember rpm and 454 as a constant being involved.

 

..