Recently got an Evo8 in that had been converted to SD and tuned by someone in another state, 2 owners ago.

When loading the file into ECUflash, initially very few tables show up.
I poked around and found legacy evo7base and Tephra V5 .xml's, which shows more tables, but many have erroneous values.

Next, I changed the internal ID to 94171715 to be read with Tephra v7 Speed density XML, even more tables show up, but with erroneous values in many more areas.


The reason I want to get into the ECU and re-tune it is because I converted the car back to MAF for the sake of ease and DD duty.

I was able to get the immobilizer code from the file, but when copied to a fresh rom the car will not start at all. (Stock injectors) I am not sure what MAP sensor is on the car, but I have tried stock and Omni 4 bar with no success.

Any help will be appreciated. If you have paypal I will donate for a solution! Thanks!

 

immobiliser is turned off in that rom you posted ,looks like a tephra v5.10 rom