Just installed some FICS High 1650cc can someone help me with some scaling starting point to get the car to start up.. on e85 (removed resistor pack) Previously was running fics 1000cc
My current fuel setup is
FIC 1650CC
Walbro 450
Fuelab AFPR
Thanks,,,

 

Bump..

 

3.552
2.736
1.752
1.272
0.984
0.792
0.576

1462 scaling


This is what I have for Q16 and pump gas

Not sure what percentage point you would go down for e85

base fuel pressure 40 psi with a walbro 450

 

thanks ill try this..
thanks,,,,,

 

This wont work.

 

he'll just need to drop scaling by about 30%

 

So scaling like 1023
thanks.

 

did it work let me know so where i know where to start with e85

 

This is what I have for my FIC 1650cc on pump gas. Scaled at 1624. I need to tune on E85 soon, so I am planning to reduce the scaler by 30% to 1125 as a starting point.



FIC 1650cc Injector Scaling and Latencies on Pump Gas

 

Want to bump this, any recent settings that work best? I’m gonna try the above post

91 oct pump gas

then e50

 

Does anyone have any more info on FIC 1650cc High Z Injector Scaling and Latencies on Pump Gas & E85?

 

anyone?

 

ID has settings on their page...

 

This is a page for FIC not ID the FIC settings come with your new set of injectors. Thats what sets FIC apart, they gave you the settings and voltage offsets for your specific set

 

This what I used for an Evo X. Car ran perfectly. Scaling was set at 1044 for E85.