When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ive just installed a Grimmspeed 3 port BCS in my Evo 8 MR JDM
Are there any newbie guides how to do a basic set up with ECU Flash?
I obviously wrongly thought this was a direct replacement for oem (ie just plug and play and would work with original mapping). The actuator isn't actuated at all as it is, so just hit boost cut all the time. Plumbed my oem BCS back in for now.
Boost desired engine load refers to the target load the ecu is trying to hit. Load and boost are related. Higher load = higher boost. The ecu uses this as boost control by calculating the error between desired load and actual load. It will increase or decrease the wastegate duty cycle by a percentage defined in the turbo boost error correction table.
Grimspeed is refering to reducing your wastegate duty cycle by 30%. I would personally start lower and work my way up to my desired level.
Hello! Help please to adjust Grimmspeed 3 Port Boost Control Solenoid on my EDM EVO9. The problem is boost jumping https://www.youtube.com/watch?v=uOdUjHjLCiM
who have any ideas?
Grimmspeed 3 Port Boost Control Solenoid
