EvoScan2.6 and Tech Edge 2J1 WBo2
#1
Newbie
Thread Starter
Join Date: Jan 2009
Location: Denmark - Europe
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
EvoScan2.6 and Tech Edge 2J1 WBo2
Well I have a TechEdge 2J1 WideBand o2 sensor controler and would like to log readings into my EvoScan2.6.
You can see it here: http://wbo2.com/2j/default.htm
It provide both RS232 and a analog output.
Where can I read info about this? how does the Innovates system interface EvoScan?
Thanks GiGas
You can see it here: http://wbo2.com/2j/default.htm
It provide both RS232 and a analog output.
Where can I read info about this? how does the Innovates system interface EvoScan?
Thanks GiGas
#2
Evolving Member
iTrader: (6)
Join Date: Jun 2006
Location: C @ tow
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
I have an AEM UEGO sensor that I'm logging with EvoScan v2.5. I've had problems logging it with v2.6 beta 8 so I can't offer any help there. I'm using the RS232 output connected to an actual DB9 serial port on my computer, not through a serial-usb converter that some people have trouble with. Are you able to get RS232 data using Hyperterm? If so, you might want to try setting up EvoScan to log it as an AEM WB. Sorry, I don't have any experience with Innovate's WB.
#3
Evolved Member
iTrader: (50)
It uses a 0-5v analog serial output like the AEM UEGO. Hook the RS232 up to the computer using the serial port or a usb to serial converter and make sure which ever you choose, set that COM PORT to 1-3. Go into evoscan and select the AEM wideband and then select the correct COM PORT that you set it up on... try that and report back...
Thread
Thread Starter
Forum
Replies
Last Post