Enabling mode23 illustrated
#31
Evolved Member
iTrader: (4)
Join Date: Feb 2008
Location: Edmonton, Alberta
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
I just got done spending some time trying to put those tables in different places. I tried putting them in 15, then 15mod, then 18; I also tried putting them in 15, 15mod, and 18 at the same time with no luck. I also tried modifying the address from 0x7f121, etc by taking out the x first, then tried taking out the 0x so the address read7f121, 8ab11,etc. Nothing made those tables show up. I did completely exit out of xml editor and ecuflash each time I made a change to a definition. Any ideas?
Am I correct that I'm changing the 52680015 definition in the rommet>mitsu>evo>52680015 file, and that is supposed to add those tables for whatever saved rom image (.hex) for rom id 52680018 when I open them in ecuflash?
Am I correct that I'm changing the 52680015 definition in the rommet>mitsu>evo>52680015 file, and that is supposed to add those tables for whatever saved rom image (.hex) for rom id 52680018 when I open them in ecuflash?
You should only need to change the 15.
#32
When I close it and open the file later it shows up so I'm thinking it's saving. I will try saving to desktop first.
Edit: I ran as administrator in order to move the file from desktop to rommetdata and replaced the 52680018. It still doesn't show up. I got pissed and uninstalled/reinstalled ecuflash and tried again. No luck. I'm starting to get pretty frustrated.
Edit: I ran as administrator in order to move the file from desktop to rommetdata and replaced the 52680018. It still doesn't show up. I got pissed and uninstalled/reinstalled ecuflash and tried again. No luck. I'm starting to get pretty frustrated.
Last edited by boostin20; Oct 7, 2009 at 07:53 AM.
#33
Evolved Member
iTrader: (4)
Join Date: Feb 2008
Location: Edmonton, Alberta
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
When I close it and open the file later it shows up so I'm thinking it's saving. I will try saving to desktop first.
Edit: I ran as administrator in order to move the file from desktop to rommetdata and replaced the 52680018. It still doesn't show up. I got pissed and uninstalled/reinstalled ecuflash and tried again. No luck. I'm starting to get pretty frustrated.
Edit: I ran as administrator in order to move the file from desktop to rommetdata and replaced the 52680018. It still doesn't show up. I got pissed and uninstalled/reinstalled ecuflash and tried again. No luck. I'm starting to get pretty frustrated.
Make sure your ECUFlash is pointing to the right directory (the same one you changed the files in). Make sure your file is actually being edited (open it with Wordpad after you save it). Make sure you're changing the right file for the ROM you want to open (if you change say, the MR XML, it won't show up until you open a MR ROM).
If none of that works, PM me.
#34
All of this can be done with the cable disconnected from the car, correct? I assumed this could be done all through the definitions file and checking to see those 3 new tables show up by opening ecuflash and loading my rom.
Pm'ed you.
Pm'ed you.
Last edited by boostin20; Oct 7, 2009 at 08:35 AM.
#35
I just got it. The 52680015 inherits from evoxbase.xml. I placed it in misc there and it showed up. Note: I don't have it in def 52680015, only in evoxbase. Now onto the placing the config.txt...
Last edited by boostin20; Oct 7, 2009 at 08:54 AM.
#43
Evolving Member
Join Date: Nov 2006
Location: Houston, TX
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Ok so I got all the way to adding the text into my .xml file but it wont let me save it. I am MS wordpad and its nto letting me save it, I am thinking because it cant save it as an .xml file. What .xml editor is everyone using? the one I foudn has this tree user interface but I cant get it to work right.
#45
Hi guys. To enable mode23 on newer ROM 52680022, is it all the same as for ROM 52680015 -> 52680020? So these below are the rows to copy into the 52680015.xml file?
<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>
Thanks!
<table name="IFMode 0x05 -> 0x23 #1" category="Misc" type="1D" address="0x7f121" scaling="Hex8"/>
<table name="IFMode 0x05 -> 0x23 #2" category="Misc" type="1D" address="0x8ab11" scaling="Hex8"/>
<table name="DoMode 0x42 -> 0x52" category="Misc" type="1D" address="0x8ab16" scaling="Hex16"/>
Thanks!
Last edited by therocket; May 30, 2010 at 12:39 PM.