Ecuflash Experts needed! V7 conversion MAF to SD
#1
Newbie
Thread Starter
Join Date: Apr 2012
Location: Hamilton, Canada
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Ecuflash Experts needed! V7 conversion MAF to SD
Hey guys, so im looking for a little help here with my Tephra V7 SD conversion. The car is a 2006 Evo IX MR Factory MAF ROM was the 88590013, Following Scheides Speed Density guide I swapped the car over to the Tephra patched 88591715.
I got the car started on this setup now without the MAF my issue is watching WB02 the car is running pig rich. (11.9-12.3) Again following the guide I started to decrement the RPM VE by 5-10%, the car had virtually no response to this if anything it became more rich because of it. (11.1-11.3)
Any input is appreciated.
Thanks, Zach.
I got the car started on this setup now without the MAF my issue is watching WB02 the car is running pig rich. (11.9-12.3) Again following the guide I started to decrement the RPM VE by 5-10%, the car had virtually no response to this if anything it became more rich because of it. (11.1-11.3)
Any input is appreciated.
Thanks, Zach.
Thread
Thread Starter
Forum
Replies
Last Post
crypto
Lancer Engine Management / Tuning Forums
1
Oct 4, 2007 06:47 AM