Originally Posted by Simon Pugmire
I have been all over trying to figure out which table in tephra v7 will compensate for colder temps. I have tried searching before making this thread because i didnt want to be a bother but i am running SD omni 4 Bar MAP and have turned off o2 sensor feedback. I am fine when its warm but once the temp outside changes alot i get different afrs. Ex. air temp 68 at 15.1 afr at idle than at air temp 45 14.0 afr. Any help would be greatly appreciated.
EDIT: Running 88591715, GM IAT sensor installed on ETS piping
Works for open loop too:
<table name="Intake Air Temp Fuel Correction" address="30FE" category="Closed-Loop Control" type="2D" scaling="CF128">
<table name="Intake Air Temp" address="714A" type="Y Axis" elements="8" scaling="TEMP"/>