SD map sensor vs RPM VE 96531706 - EvolutionM - Mitsubishi Lancer and Lancer Evolution Community



SD map sensor vs RPM VE 96531706

Reply
 
 
 
Thread Tools Search this Thread
Old Feb 5, 2018, 12:01 PM   #1
Newbie
Thread Starter
 
smoke3d's Avatar
 
Join Date: Jan 2009
Location: Russian Federation, Vladivostok
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 6

Question SD map sensor vs RPM VE 96531706

Whats up guys.
I have a problem on SD.
Car
Evo 8 (96531706 rom)
Rc 1000cc injectors
S2 cams
Stock turbo Evo9
Aem 320 lph
map JDM 3 bar
fuel pump gas
No boost leak
New spark plugs
New O2 sensor
_____________________________
I now the best settings map sensor VE vs load must be 1:1 and RPM VE must be flat.
If I raise RPM VE (500-1250rpm set to 80) - AFR 10.7-11
I have a log of work on idle and WOT.
Tell me I'm moving in the right direction?
If not, what am I doing wrong?
Attached Thumbnails
SD map sensor vs RPM VE 96531706-setting.jpg   SD map sensor vs RPM VE 96531706-log-screen.jpg  
Attached Files
File Type: csv EvoScanDataLog_2018.02.05_21.05.57.csv (225.8 KB, 0 views)
Offline
 
Reply With Quote
Old Feb 5, 2018, 07:57 PM   #2
Newbie
Thread Starter
 
smoke3d's Avatar
 
Join Date: Jan 2009
Location: Russian Federation, Vladivostok
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts

Drives: 6

Anyone?
Offline
 
Reply With Quote
Old Feb 9, 2018, 06:49 PM   #3
Evolving Member
 
Join Date: Jan 2015
Location: Dakota Oil Field
Posts: 138
Thanked 3 Times in 3 Posts

Drives: Evos

and whats your problem? I cant see afr....but VE from 500 to 1500 seems low

I bet its lean
Offline
 
Reply With Quote
Old Feb 9, 2018, 11:35 PM   #4
Evolved Member
 
Join Date: Mar 2013
Location: in a garage
Posts: 621
Thanked 13 Times in 13 Posts

Drives: Lancer

You'll find the problem after you fit a fuel pressure gauge.
Offline
 
Reply With Quote
Old Feb 11, 2018, 12:50 AM   #5
Evolved Member
 
mines5's Avatar
 
Join Date: Oct 2010
Location: Streets of willow
Posts: 708
Thanked 13 Times in 13 Posts

Drives: Evo7, Evo 8 GSR, GT-R

Your RPM VE settings are not correct.
At Idle your RPM VE should be any where between 90 and 80. Leave the rest as stock.
Start playing with MAP VE to get better AFRs.

Did you read Scheides Guide for SD tune ? If not please read it again.
Offline
 
Reply With Quote
Old Feb 11, 2018, 08:24 AM   #6
Evolved Member
iTrader: (2)
 
ronaldo9's Avatar
 
Join Date: Oct 2008
Location: New Jersey
Posts: 655
Thanked 12 Times in 12 Posts

Drives: 2005 Evo VIII MR

Also ensure your fuel trims and injector scalings are in check.
Offline
 
Reply With Quote
Old Feb 12, 2018, 06:21 AM   #7
Newbie
 
400s's Avatar
 
Join Date: Mar 2014
Location: C
Posts: 49
Thanks: 0
Thanked 3 Times in 3 Posts

Drives: Evo IX MR

Start by sorting out your injector scaling and latencies otherwise you will never resolve the issue.

Then work on your MAP VE (which seems quite off...)

RPM VE should only be for fine tuning purposes...
Offline
 
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
How To: Speed Density on the evo8 using tephra v7/Phenem pre-patched roms scheides EcuFlash 341 Sep 4, 2017 10:08 PM
Speed Density Questions Rom 96531706 4b11slayer EcuFlash 16 Jul 28, 2017 11:33 AM
SD Kit and SD rom selection mines5 EcuFlash 11 Oct 16, 2016 05:46 AM
96531706 SD phenem mines5 EcuFlash 0 Sep 27, 2016 02:11 PM
OMNI 4 Bar with 96531706 fabiano EcuFlash 7 Feb 22, 2016 02:44 AM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -7. The time now is 04:13 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: