Buschur's dyno testing......never ends.
#61
Evolved Member
iTrader: (6)
Join Date: Sep 2003
Location: Knoxville Tennessee
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
but how much more power, I don't know...
Last edited by Johnboy1065; Jan 1, 2009 at 04:15 PM.
#62
In theory and I suppose somewhere someone has test results to go along with it, the more heat you can keep in the header/turbine housing the faster the turbo will spool up. That would of course make for a fatter curve on the dyno. In the case of the blanket, I looked at logs before and after and I can't see anything in the logs. Now, any time you can drop underhood temps the car is going to produce more power if that's where the incoming air is being drawn from.
Ace, you're welcome. Thanks for taking the time to recognize what we do.
Ace, you're welcome. Thanks for taking the time to recognize what we do.
#65
Evolved Member
iTrader: (10)
Join Date: May 2005
Location: long island,ny
Posts: 1,055
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for sharing your test results with us Dave, as usuall- bringing the facts to the table!!!
Looks like there will be more 5-bolt housings up for sale this season!!
8.80's for the street rs next??
Looks like there will be more 5-bolt housings up for sale this season!!
8.80's for the street rs next??
#66
Evolving Member
iTrader: (4)
Join Date: May 2008
Location: Peachtree City, GA
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Hey Dave, I was wondering how that 12 tooth trigger disk worked out? How much better did it start? Maybe we can get a video on it. Anyways I was wondering how much you are selling them for and if you have them in stock. Also will be assisting with the AEM setup?
#68
Yes, I'm guessing there will be more 5 bolt housings up for sale this year, haha. This particular housing is really sweet, it's just expensive.
The 12 tooth wheel worked out really good. It's on my car now. If you buy one the instructions come with it to set up the AEM. You can thank Brad Brooks for that, as far as I know he wrote them. I believe the wheel is $110, I'm not at the shop and can't remember off the top of my head.
The car does fire instantly with the wheel.
The 12 tooth wheel worked out really good. It's on my car now. If you buy one the instructions come with it to set up the AEM. You can thank Brad Brooks for that, as far as I know he wrote them. I believe the wheel is $110, I'm not at the shop and can't remember off the top of my head.
The car does fire instantly with the wheel.
#70
Evolved Member
iTrader: (6)
Join Date: Sep 2003
Location: Knoxville Tennessee
Posts: 1,275
Likes: 0
Received 0 Likes
on
0 Posts
Fu*kin 5-bolt housings, I hated that little bastard when it was on my car Finally got RID of that sucker lol
with my old turbo kit I couldnt even switch from .63 a/r to .82 a/r lol
I'm now using the same housing that was tested in this thread thanks for doing all the testing!
with my old turbo kit I couldnt even switch from .63 a/r to .82 a/r lol
I'm now using the same housing that was tested in this thread thanks for doing all the testing!
Last edited by Johnboy1065; Jan 15, 2009 at 03:30 PM.
#74
Evolving Member
iTrader: (4)
Join Date: May 2008
Location: Peachtree City, GA
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
Dave, another question about the 12-tooth disc... what are you guys using as far as balance shaft goes... it says it cannot support the balance shafts. Do you guys use a stub shaft or do you think it would work with the AMS eliminator kit (i know they arent your favorite)?