Just picked my car up the other night from Buschur racing. I had there stage 3 head put in along with there 272 cams/drop in pistons,rods/and some other little things done.

AEM EMS
1200 inj
br double pump
hta35r cast kit

Tune was done on 110oct and 36psi

520 awhp, 388ftlbs torgue Buschur's Mustang dyno

I prob forgot tons, any question or comments just ask.

 

Wow looks like the power was still climbing to 8000rpms. Do you drive with 110 all the time, is there another map as well?

 

Seems pretty low for an HTA35r on 36 psi. The cast manifold could be limiting your top end, as well as torque.

 

Yea I thought it was low to but what ever the car moves. Cast mani prob is hurting the power but when I bought the kit I didnt have to big of plans for the car.

I have a pump gas tune on 93oct which made like 476awhp 345ftlbs torque.

The rev limiter is at like 8800 I believe. I took it up there on the way home and it was still pulling and the a/f still looked good.

 

have you had a chance to take it to the track yet?

 

No track time yet. Here in Ohio it rains every day. This fri is going to be scattered showers all day so maybe this sat. I can get out to the track. It will still be on all season so bad times I expect. My dunlops wont be in until the 4th or so.

Well I ran 11.50's at 125mph on ****ty *** all seasons and crap tein springs. 1.7x 60'ft spinning out the hole