What's your Stock Turbo HP/TQ?
#22
Evolved Member
iTrader: (18)
But AMAZNG gains in the mid range... the ~5psi of boost is helping alot... right now I am at 29psi.. I will be going to 34psi tonight!
#24
Evolved Member
iTrader: (30)
looked at your graph. Just a question is your AFR measured at the tail pipe( sniffer) or in the downpipe/testpipe... My AFR is a little rich for using such a big nozzle and I can really do much about it.
But AMAZNG gains in the mid range... the ~5psi of boost is helping alot... right now I am at 29psi.. I will be going to 34psi tonight!
But AMAZNG gains in the mid range... the ~5psi of boost is helping alot... right now I am at 29psi.. I will be going to 34psi tonight!
#26
looked at your graph. Just a question is your AFR measured at the tail pipe( sniffer) or in the downpipe/testpipe... My AFR is a little rich for using such a big nozzle and I can really do much about it.
But AMAZNG gains in the mid range... the ~5psi of boost is helping alot... right now I am at 29psi.. I will be going to 34psi tonight!
But AMAZNG gains in the mid range... the ~5psi of boost is helping alot... right now I am at 29psi.. I will be going to 34psi tonight!
#29
Evolving Member
Here mine on a stock Evo 9 turbo with a 50/50 ethanol/pump fuel mix (E50) on our crappy fuel we get in South Africa.
Mods on my Evo 8...
Stock Evo 9 turbo, BC 272 cams, Megan O2 housing, Tephra V7 mods/patches (ECU controlled boost with Greddy 3 port solenoid), Works down pipe, Snow Performance WI using the smallest jet - injecting water only. Custom SS 76mm decatted exhaust with Megan back box.
Forge 1,5 bar actuator, Stage 4 Competion clutch.
@2 bar boost = 29 PSI
269wkw = 360HP
550nm torque = 405 Ft lbs
Dyno run was done in Johannesburg, South Africa, which is 5,558 ft / 1,694 m above sea level.
Two vids of the dyno run...
1st run
http://www.youtube.com/watch?v=eF9QQl-T6Sc
2nd run
http://www.youtube.com/watch?v=sUzLD6LzJDc
Mods on my Evo 8...
Stock Evo 9 turbo, BC 272 cams, Megan O2 housing, Tephra V7 mods/patches (ECU controlled boost with Greddy 3 port solenoid), Works down pipe, Snow Performance WI using the smallest jet - injecting water only. Custom SS 76mm decatted exhaust with Megan back box.
Forge 1,5 bar actuator, Stage 4 Competion clutch.
@2 bar boost = 29 PSI
269wkw = 360HP
550nm torque = 405 Ft lbs
Dyno run was done in Johannesburg, South Africa, which is 5,558 ft / 1,694 m above sea level.
Two vids of the dyno run...
1st run
http://www.youtube.com/watch?v=eF9QQl-T6Sc
2nd run
http://www.youtube.com/watch?v=sUzLD6LzJDc
Last edited by SeanV; Jul 21, 2009 at 10:12 AM.