Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

Force-Fed/Epic Customer Dyno, Impressive stage 1 IX

Thread Tools
 
Search this Thread
 
Old Oct 20, 2009 | 04:53 PM
  #1  
Force-Fed Performance's Avatar
Thread Starter
Former Sponsor
iTrader: (46)
 
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
Thumbs up Force-Fed/Epic Customer Dyno, Impressive stage 1 IX

A customer of ours Jesse(mivecevo9) came to us for a exedy twin rebuild. Upon checking the car over and talking with Jesse we learned that his car had NEVER been tuned. Only a "Mail in" flash from another tuner. Jesse agreed the car had felt sluggish and wanted to dial her in after the clutch rebuild. Came out with some VERY impressive results with the mods he had.




06 MR
Full TBE
Tubular mani(ebay?)
walbro 255
perrin intercooler
injen intake/upper pipe
HKS blow off(re-circ)
ARP headstuds
Crappy MBC

Baseline was not bad but running TERRIBLY rich. We knew we had alot of room to work.


After a few pulls and trying to lean her out some we noticed how bad the boost was falling off with the cheap MBC that was installed, Not holding boost at all dropping from 22 to 17psi way before redline


Enter the Forge MBC we installed with a heavy spring to correct the boost problem and presto Look at the dotted green line of how bad boost was falling off compared to after the install of the solid green line of the forge
Comparison of old flash to a Crewdawg Force-Fed tune


Finally fixing the boost problem and giving her the timing and fuel she wanted we ended up with some great numbers for a IX with bolt ons and NO CAMS on a mustang dyno





Mr. Berrios, the pride of Puerto Rico doing what he does best


A good pic of what boost does to cheap manis


and finally a Vid



Thanks to Jesse for having confidence in us to take care of his car and give her the attention she needed. Great job to Epic motorsports for the clutch rebuild on such short notice and hats off to Babi(Crewdawg130) of Force-Fed for making some great numbers on a mildly modded IX. Way to go BRO!!

Last edited by Force-Fed Performance; Oct 21, 2009 at 08:04 AM.
Reply
Old Oct 20, 2009 | 05:04 PM
  #2  
EvoLutionized8's Avatar
Evolved Member
iTrader: (62)
 
Joined: Jul 2005
Posts: 676
Likes: 0
From: Nashville, TN
Nice job you guys... keep it up..
Reply
Old Oct 20, 2009 | 05:20 PM
  #3  
Force-Fed Performance's Avatar
Thread Starter
Former Sponsor
iTrader: (46)
 
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
Thanks mike, cant wait to get yours on there. Have you decided on a turbo yet?
I think you and troung are going with the same company now
Reply
Old Oct 20, 2009 | 05:26 PM
  #4  
dsm25psi's Avatar
Evolved Member
iTrader: (44)
 
Joined: Jun 2007
Posts: 914
Likes: 0
From: Charlotte,NC
good work guys
Reply
Old Oct 20, 2009 | 05:44 PM
  #5  
Jeovannie's Avatar
Evolved Member
iTrader: (26)
 
Joined: Jan 2003
Posts: 645
Likes: 0
From: FT. BRAGG
nice
Reply
Old Oct 20, 2009 | 05:53 PM
  #6  
evoforlife's Avatar
Evolving Member
iTrader: (68)
 
Joined: Sep 2009
Posts: 448
Likes: 0
From: FL
those are some really good numbers on a mustang dyno for a stock turbo do you guys have a correction factor of the mustang dyno?
Reply
Old Oct 20, 2009 | 06:03 PM
  #7  
Force-Fed Performance's Avatar
Thread Starter
Former Sponsor
iTrader: (46)
 
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
yes those are the corrected numbers
Reply
Old Oct 20, 2009 | 06:43 PM
  #8  
mivecevo9's Avatar
Newbie
iTrader: (1)
 
Joined: Dec 2008
Posts: 1
Likes: 0
From: youngsville
yea....thanks to justin for helping me out...and thanks to epic motorsports for alll there help....thay did a good job on jessica lol..cant wait to pick her up tom..
Reply
Old Oct 20, 2009 | 07:03 PM
  #9  
detroit pistins's Avatar
Evolved Member
iTrader: (102)
 
Joined: Aug 2007
Posts: 2,173
Likes: 19
From: Detroit
Force-Fed & CrewDawg
Very impressive #'s! good job!
btw what was the boost ?





Originally Posted by mivecevo9
yea....thanks to justin for helping me out...and thanks to epic motorsports for alll there help....thay did a good job on jessica lol..cant wait to pick her up tom..

so wait u don't even have a licp or an o2 housing??????????/ wtf man!..lol,

Ps. i will be at ur work this fri.
Reply
Old Oct 20, 2009 | 07:28 PM
  #10  
4kinboost's Avatar
Evolved Member
iTrader: (10)
 
Joined: May 2005
Posts: 1,055
Likes: 0
From: long island,ny
Great write-up

Last edited by 4kinboost; Oct 20, 2009 at 07:30 PM.
Reply
Old Oct 20, 2009 | 08:09 PM
  #11  
RREvoX08's Avatar
Newbie
iTrader: (1)
 
Joined: Sep 2008
Posts: 96
Likes: 0
From: Tallahassee, but currently reside @ Camp LeJeune
Can mr berrios tune my X, i have the evoscan, and ecu flash on my comp?!?
Reply
Old Oct 20, 2009 | 08:14 PM
  #12  
Force-Fed Performance's Avatar
Thread Starter
Former Sponsor
iTrader: (46)
 
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
Originally Posted by mivecevo9
yea....thanks to justin for helping me out...and thanks to epic motorsports for alll there help....thay did a good job on jessica lol..cant wait to pick her up tom..
No problem. We cant wait to expand our business to all those central NC evo guys that we know are out there. My friend a bolt on evo with 366/360 is a mean street car. No telling what it would do with a set of cams in.

Originally Posted by detroit pistins
Force-Fed & CrewDawg
Very impressive #'s! good job!
btw what was the boost ?



so wait u don't even have a licp or an o2 housing??????????/ wtf man!..lol,

Ps. i will be at ur work this fri.
Nope, boost was spiked at 25psi holding 22psi. And Mr. Crewdawg is also part of the Force-Fed/Epic family, we had to get a latin ringer to tune cars lol

Originally Posted by 4kinboost
Great write-up
thanks, my first big thread lol and many more to come

Originally Posted by RREvoX08
Can mr berrios tune my X, i have the evoscan, and ecu flash on my comp?!?

Sure can, already tuned a couple and you would be AMAZED at the numbers he pulled out of X's with just cat-backs
Reply
Old Oct 20, 2009 | 08:30 PM
  #13  
detroit pistins's Avatar
Evolved Member
iTrader: (102)
 
Joined: Aug 2007
Posts: 2,173
Likes: 19
From: Detroit
Awsome work!
Reply
Old Oct 20, 2009 | 08:30 PM
  #14  
06MREvo's Avatar
Evolved Member
iTrader: (90)
 
Joined: Nov 2005
Posts: 4,800
Likes: 6
From: Raleigh, NC
nice job guys...that power with stock cams is pretty sweet...i would like to see how my car compares to that 1...
Reply
Old Oct 20, 2009 | 08:36 PM
  #15  
Force-Fed Performance's Avatar
Thread Starter
Former Sponsor
iTrader: (46)
 
Joined: Oct 2009
Posts: 1,381
Likes: 0
From: Raleigh, Fayetteville NC
we can after your magnaflow install
Reply



All times are GMT -7. The time now is 07:14 PM.