Notices
Evo Dyno Tuning / Results Discuss vendor and member dyno tuning techniques, results and graphs.

FPRed 500whp 110oct 29psi

Thread Tools
 
Search this Thread
 
Old Dec 21, 2009 | 02:12 PM
  #16  
Mellon Racing's Avatar
Account Disabled
iTrader: (38)
 
Joined: Aug 2005
Posts: 9,319
Likes: 1
From: Virginia Beach, Virginia
very nice...reds are fun
Reply
Old Dec 21, 2009 | 02:17 PM
  #17  
IDRINKV8'S's Avatar
Account Disabled
 
Joined: May 2008
Posts: 435
Likes: 0
From: new york
Originally Posted by aka.ralliart15
Oh i understand now, pull was 3rd gear sorry, Im spinning 2nd already as it is, Im coming back for a retune on pump gas in a week or so and I wanna compare it to the Tomei
With pump gas u should be around 460 whp and 400 tq cwill is a very good tuneryour gonna make more power then the tomie trust me..lol...Also the turbo is gonna hit harder when u take care if the exhaust leak.
Reply
Old Dec 21, 2009 | 02:22 PM
  #18  
IDRINKV8'S's Avatar
Account Disabled
 
Joined: May 2008
Posts: 435
Likes: 0
From: new york
My tq was around 426.on a third gear pull..When we put the car in 4th to do a pull it spiked to 460 tq and the stock clutch slipped..Note i have a mr which pulls are done in 4th gear not third but my tuner was trying to focus trying to make it feel good on the street as well as the dyno..
Reply
Old Dec 21, 2009 | 02:24 PM
  #19  
IDRINKV8'S's Avatar
Account Disabled
 
Joined: May 2008
Posts: 435
Likes: 0
From: new york
Originally Posted by travman
i see 495 not 500.......
Are u serious...
Reply
Old Dec 21, 2009 | 02:28 PM
  #20  
aka.ralliart15's Avatar
Thread Starter
Evolved Member
iTrader: (20)
 
Joined: Jul 2007
Posts: 1,453
Likes: 0
From: Gator Nation(UF)
Originally Posted by IDRINKV8'S
With pump gas u should be around 460 whp and 400 tq cwill is a very good tuneryour gonna make more power then the tomie trust me..lol...Also the turbo is gonna hit harder when u take care if the exhaust leak.
Originally Posted by IDRINKV8'S
My tq was around 426.on a third gear pull..When we put the car in 4th to do a pull it spiked to 460 tq and the stock clutch slipped..Note i have a mr which pulls are done in 4th gear not third but my tuner was trying to focus trying to make it feel good on the street as well as the dyno..

Cant wait to get that pump gas tune now lol What are you trapping btw?
Reply
Old Dec 21, 2009 | 02:41 PM
  #21  
mrtalon20's Avatar
Evolving Member
iTrader: (32)
 
Joined: Sep 2008
Posts: 343
Likes: 0
From: albany ga
Originally Posted by aka.ralliart15
My car was tuned by Cwill on Saturday, I recently just switched to the FPRed and I wanted to get a nice tune, this graph is the last pull, I made more on the previous one. The car wasn't pushed to the limits since its on the stock block and my daily. I had a cracked header so I had a pretty bad exhaust leak but the car feels nice on the street regardless. I'm gonna fix it and come back for a re-tune. Thanks again Cwill

Mods:

80mm FPRed
Stock Motor/ECU
MAP Ported manifold
GTSpec header(cracked)
Injen piping
Kelford 272's
etc

Thats wats up luis I cant wait to feel the power from my new lil evo lol. Nice number.
Reply
Old Dec 21, 2009 | 02:56 PM
  #22  
RockmanX's Avatar
Evolved Member
iTrader: (78)
 
Joined: Aug 2008
Posts: 6,623
Likes: 4
From: Louisiana
Originally Posted by pure_evo
OK. I understand. I like the torque on E85 that the Tomei delivers and the fact that it comes with the installation kit.
lol the install kit is only 150 or 199 if you need the oil line. not expensive at all lol i would know i just got it with my fp black
Reply
Old Dec 21, 2009 | 03:09 PM
  #23  
IDRINKV8'S's Avatar
Account Disabled
 
Joined: May 2008
Posts: 435
Likes: 0
From: new york
Originally Posted by aka.ralliart15
Cant wait to get that pump gas tune now lol What are you trapping btw?
I haven't taken it to the track yet but i should see a 126 to 128 trap ..

Originally Posted by RockmanX
lol the install kit is only 150 or 199 if you need the oil line. not expensive at all lol i would know i just got it with my fp black
How does the black feel like?
Reply
Old Dec 21, 2009 | 03:16 PM
  #24  
AWD Motorsports's Avatar
Former Sponsor
iTrader: (211)
 
Joined: Jun 2007
Posts: 9,665
Likes: 1
From: South Florida
Originally Posted by IDRINKV8'S
It's almost like running a open header horsepower goes up but u lose tq...when u switch to the stocker you'll see what i'm talking about..


The red loves meth and bet u you'll smoke the tomie anyday of the week..When the red hit's you'll feel it..bet u when u put the stocker on you'll be able to spin 2nd like nothing..u didn't tell me what gear this dyno pull was?
Thats amazing.. I have never heard an exhaust leak from a cracked manifold can make more power!!! Things you can learn on Evom..

Mike

Last edited by AWD Motorsports; Dec 21, 2009 at 03:27 PM.
Reply
Old Dec 21, 2009 | 03:23 PM
  #25  
Creamo3's Avatar
Evolved Member
iTrader: (48)
 
Joined: May 2003
Posts: 2,078
Likes: 2
From: Chicago
Originally Posted by IDRINKV8'S
Nice graph and power kinda look's like my setup,but i'm running 100%meth..With the header leaking it helps a bit on horsepower but lowers the tq a bit ...When u fix it the whp might stay the same and tq will go up which is a plus........Also what gear was the car in when this pull was made on the dyno?
A leaking maniflod does nothing but lower both power/torque and hurt spool. The turbo is not maximizing the exhaust pulse if it is leaking.
Reply
Old Dec 21, 2009 | 03:52 PM
  #26  
IDRINKV8'S's Avatar
Account Disabled
 
Joined: May 2008
Posts: 435
Likes: 0
From: new york
Originally Posted by Mike@AwdMotorsports
Thats amazing.. I have never heard an exhaust leak from a cracked manifold can make more power!!! Things you can learn on Evom..

Mike
i guess i was wrong....lol...i thought it would have just hurt tq more then horsepower i knew it would hurt spool.
Reply
Old Dec 21, 2009 | 03:54 PM
  #27  
fqjdmct9a's Avatar
Evolved Member
iTrader: (21)
 
Joined: Jun 2008
Posts: 555
Likes: 0
From: Orlando, FL
Congrats on your new set-up!
Reply
Old Dec 21, 2009 | 03:59 PM
  #28  
aka.ralliart15's Avatar
Thread Starter
Evolved Member
iTrader: (20)
 
Joined: Jul 2007
Posts: 1,453
Likes: 0
From: Gator Nation(UF)
Originally Posted by mrtalon20
Thats wats up luis I cant wait to feel the power from my new lil evo lol. Nice number.
Thanks man, that car is just waiting for you, congrats on the new whip you'll love it i pissed my pants when I went for a ride in it


So i guess I can pick up a bit more HP,TQ and spool it seems, that's good to know, ported stocker here I come lol The last test and tune at the local 1/4 mile is Dec 30th, i wanna re-tune before i go to see what times i can get

Thanks everyone for the comments too, I just cant respond to all of you individually lol

Last edited by aka.ralliart15; Dec 21, 2009 at 04:07 PM.
Reply
Old Dec 21, 2009 | 04:13 PM
  #29  
mrtalon20's Avatar
Evolving Member
iTrader: (32)
 
Joined: Sep 2008
Posts: 343
Likes: 0
From: albany ga
Originally Posted by aka.ralliart15
Thanks man, that car is just waiting for you, congrats on the new whip you'll love it i pissed my pants when I went for a ride in it


So i guess I can pick up a bit more HP,TQ and spool it seems, that's good to know, ported stocker here I come lol The last test and tune at the local 1/4 mile is Dec 30th, i wanna re-tune before i go to see what times i can get

Thanks everyone for the comments too, I just cant respond to all of you individually lol

Hey will any tracks be open this weekend cause im coming down to get the car let me know and I wanna go for a rind in your car as well.
Reply
Old Dec 21, 2009 | 04:23 PM
  #30  
aka.ralliart15's Avatar
Thread Starter
Evolved Member
iTrader: (20)
 
Joined: Jul 2007
Posts: 1,453
Likes: 0
From: Gator Nation(UF)
Originally Posted by mrtalon20
Hey will any tracks be open this weekend cause im coming down to get the car let me know and I wanna go for a rind in your car as well.
All the tracks will be closed this weekend The only event left this year is a Test and tune in West palm beach and thats the Dec. 30th event I was talking about. Sure man I'll take you for a ride
Reply



All times are GMT -7. The time now is 10:03 AM.