Another 600hp stock block thread Texas style
I pretty much installed everything minus the double pumper on the car so I don't know all the details. I was trying yo run a single 416 e85 pump but it ran out of fuel on 12 volts so they ended up doing the double pumper at their shop and finished the tune. They modified my housing and added a 255hp pump and rewired it just like the stm rewire kit I believe and they have the 2nd pump coming on at 6 psi of boost via the aem ems series 2 instead of a hobbs switch from what I was told.
Nice man congrats on the numbers I wanted to get my stock block evo 8 there before it blew up, but as you can see by my writing it happened. I really wanted to see what it would do on a dyno jet. My stock block evo with 6265 made 700 on virtual dyno, and made 600 on ISP dyno pack. And from what I understand there dyno pack dyno reads real low. Anyways wish you the best have fun with it. My car should be getting tuned this weekend on high compression 2.1 hoping to make somewhere around 800 on mustang dyno.
Wow sorry to hear about you losing your motor. I hope I don't suffer the same fate but I understand the risks involved with this setup. Good luck on your new setup and I hope to see good results in the near future.
I pretty much installed everything minus the double pumper on the car so I don't know all the details. I was trying yo run a single 416 e85 pump but it ran out of fuel on 12 volts so they ended up doing the double pumper at their shop and finished the tune. They modified my housing and added a 255hp pump and rewired it just like the stm rewire kit I believe and they have the 2nd pump coming on at 6 psi of boost via the aem ems series 2 instead of a hobbs switch from what I was told.
Thanks again and yeah I will make a thread forsure! Thank god I went with the Buschur Double Pumper and 2150cc FIC injectors lol.
