HI all as above my evo 8 is running a precision gen2 6062
it has been road tuned and never been on a dyno was just curious as to what power figures the car might be running what are people's thoughts the spec is as follows

Manley I beam rods
Manley billet 88mm crank
Manley pistons 85mm
Manley valve springs
272 cams
precision 6062 gen2 (RUNNING 30 PSI )

6 boost manifold
46mm precision waste gate
4 inch intake
4 inch exhaust system
1200cc ID INJECTORS
Warlbro 450lph hardwired
Sard fuel pressure regulator
link g4 management
I am currently running 97 Ron fuel
few other subtle mods mods but that's the base of engine work

 

Boost/timing/rpm?

 

Boost is 30 psi at peak not sure on timing
and rpm limit is 8200

 

AG Autosports in South Florida cracked 800hp with that turbo, to give you an idea of max effort on e85. 40 plus psi

 

It will be interesting to see the dyno results
next month we are going for a race fuel tune (120 ron ) 35- 40 psi
But at the minute I should be safe enough thinking it's around around 500hp mark

 

Should do 500 whp no problem even on pump gas.

 

Ot but do you have a link to that? Thats a lot for a 6062 and surprising.