hey guys.

i need help with my JDM VIII MR headlights that i ordered. i called around and nobody seems to know.

in short, what do i need to solder the Fog light HARNESS wires to. the two blue and yellow wires?

HERE ARE SOME PICS TO HELP:

 

bump for pictures

 

The way i did mine was, I cut the stock connector off, take some crimpers and expose some of the wire, cut the foglight ones as well so you have some wire exposed, twist them together and put some electrical tape on it and your done.

 

bump for more help

 

you dont solder the harness onto the headlight, you take the stock foglight plug/harness thats coming off the car, and either cut it off, or tap into it with your harness.

 

is the foglights harness seperate from the main healdight harness?

i sold my stock headlights but i stripped all the wiring off of them.

 

k i just checked under the hood and i believe the stock foglight harness is still connected to the car. is this correct?

 

yes, take it off the stock foglight plug. I just snipped the old stock plug and then soldered them together with heatshrink. You spend a lot of money on your car. Do it right or go home.

 

Hey thanks for the help guys. especially NocturnalEvo!

here are the results:

 

dammn now it looks awsome !

 

now send me your old harness!..lol