Notices
Evo Electrical / Audio / Security Discuss electrical systems, audio system upgrades, or alarm configurations.

Radio problems

Thread Tools
 
Search this Thread
 
Old Jul 9, 2011 | 10:36 PM
  #1  
shamoo152's Avatar
Thread Starter
Newbie
 
Joined: Jul 2011
Posts: 3
Likes: 0
From: Lincolnton
Angry Radio problems

The stock radio in my 2011 lancer won't turn on after accidentally splincing the dAta cable into my amps remote wire, please help!
Reply
Old Jul 12, 2011 | 01:14 AM
  #2  
JDMCT9MR's Avatar
Evolved Member
iTrader: (56)
 
Joined: Apr 2007
Posts: 3,062
Likes: 2
From: Los Angeles
Have you checked to see if you may have blown a fuse?
Reply
Old Jul 12, 2011 | 01:00 PM
  #3  
shamoo152's Avatar
Thread Starter
Newbie
 
Joined: Jul 2011
Posts: 3
Likes: 0
From: Lincolnton
Yes, I've checked almOst every fuse on the car, I could only find 2 that looked like they were for the radio and they're All fine, the radio won't display or turn on but the faceplate still lights up ( buttons and what not)
Reply
Old Aug 10, 2011 | 01:55 AM
  #4  
t5caveman's Avatar
Newbie
 
Joined: Jan 2007
Posts: 10
Likes: 0
From: San Diego
i'd recommend using a volt meter and reading the battery and ignition wires at the connector on the back of the radio for 12vdc. if you are getting power there then it's gunna be a fried radio. The face will still light up as lighting has it's own wire that supplies 12 vdc.
Reply




All times are GMT -7. The time now is 01:46 PM.