Have a 2000 Evo 6. Installed a walbro 450 and FIC 1650. Was suggested by my tuner to install an adjustable FPR and upgrade line kit. Bought the kit from STM along with the hard wire kit. Installed the FPR and went well. Installed the hard wire kit and the engine cranks but does not turnover. Checked my signal wire and it is sending voltage. Checked my wiring of the relay and to the battery and ground, pretty straight forward, but still no start. I don't know any reason why it wouldn't start.

Any advice/input would be greatly appreciated. Thanks!

 

Did you scale the injectors first?

 

I'm working with Tom at TSCOMP on the car and I believe the base map he sent me scaled the injectors. Not fully sure though.