Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Qusetion about power output for mods

Old Oct 6, 2004 | 08:23 PM
  #1  
chapter8's Avatar
Thread Starter
Evolved Member
iTrader: (7)
 
Joined: Mar 2004
Posts: 609
Likes: 0
From: Virginia
Qusetion about power output for mods

Yes...yes I searched this to death.
Please forgive me if this has been under my nose the whole time and maybe somebody could direct me to the appropriate thread if there is one....anyways here we go

What whp would I be looking at with these mods?
Halmann @21psi
Dynoflash (mail in)
cam gears
turbo back
hks rs intake
fuel pump
Greddy FMIC
I/C pipes (full kit greddy)



would this put me at the 325whp range or closer to the 350whp range on a Dynojet
Reply
Old Oct 6, 2004 | 08:24 PM
  #2  
chapter8's Avatar
Thread Starter
Evolved Member
iTrader: (7)
 
Joined: Mar 2004
Posts: 609
Likes: 0
From: Virginia
ohh on 93 octane
also will I be running out of injectors at this point?
Reply
Old Oct 6, 2004 | 08:26 PM
  #3  
evo542's Avatar
Evolved Member
 
Joined: Jan 2004
Posts: 1,227
Likes: 0
i'm guessing 320whp, with cams and custome flash around 335-345whp (on a dynojet)

Last edited by evo542; Oct 6, 2004 at 09:05 PM. Reason: mispelling
Reply
Old Oct 6, 2004 | 08:58 PM
  #4  
4Gsixty3's Avatar
Evolved Member
iTrader: (13)
 
Joined: Jun 2004
Posts: 882
Likes: 0
From: Lawrenceville NJ
will be around 330- 340 WHP range on a custom tune.
Reply
Old Oct 6, 2004 | 09:02 PM
  #5  
chapter8's Avatar
Thread Starter
Evolved Member
iTrader: (7)
 
Joined: Mar 2004
Posts: 609
Likes: 0
From: Virginia
what else would I need to put me in the 350whp realm?
Reply


Thread Tools
Search this Thread

All times are GMT -7. The time now is 01:16 PM.