Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Fujitsubo rm01a pics anyone?

Thread Tools
 
Search this Thread
 
Old Jan 31, 2005 | 04:51 PM
  #1  
GTKage's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 574
Likes: 0
From: South Daytona, FL
Question Fujitsubo rm01a pics anyone?

what s up guys!? i m looking for some feedback and picture of the fujitsubo exhaust on a evo 8.
Where did you buy it? And for how much?

thanks in advance
Reply
Old Jan 31, 2005 | 04:58 PM
  #2  
oguratevo's Avatar
Evolved Member
iTrader: (7)
 
Joined: Dec 2003
Posts: 823
Likes: 0
From: Los Angeles, Manila Phils
Check this out:http://www.z1auto.com/prodmore.asp?m...ust&prodid=705
Reply
Old Jan 31, 2005 | 05:12 PM
  #3  
GTKage's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 574
Likes: 0
From: South Daytona, FL
yeh i have seen those already, but that s on a evo 7 bumber, i want to see it on a actual evo 8

thanks anyway
Reply
Old Jan 31, 2005 | 05:43 PM
  #4  
d3wu's Avatar
Evolving Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 131
Likes: 0
From: Los Angeles, CA
i bought mine from Street Image - i think $650?. the exhaust runs pretty short, just like all the other JDM exhausts - i ended up getting the CF heatshield so i wouldn't roast my bumper too badly

no pics yet but ill post them if i ever get them up.
Reply
Old Jan 31, 2005 | 05:48 PM
  #5  
GTKage's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Oct 2003
Posts: 574
Likes: 0
From: South Daytona, FL
thanks for the info, whenever u have time pics would be nice
Reply
Old May 26, 2005 | 08:20 AM
  #6  
fsugatorbait's Avatar
Evolved Member
iTrader: (16)
 
Joined: Mar 2005
Posts: 1,338
Likes: 0
From: CT
Originally Posted by d3wu
i bought mine from Street Image - i think $650?. the exhaust runs pretty short, just like all the other JDM exhausts - i ended up getting the CF heatshield so i wouldn't roast my bumper too badly

no pics yet but ill post them if i ever get them up.

How is your bumper holding up? How is the sound at idle and WOT?
Reply
Old May 26, 2005 | 08:33 AM
  #7  
DaWorstPlaya's Avatar
Evolved Member
iTrader: (31)
 
Joined: Jan 2004
Posts: 3,216
Likes: 7
From: Denver, CO
I have one and my bumper is fine. It doesn't blacken you bumper if you don't take out any of the cats. Sound wise, under idle it sounds like stock, even in upper rpms at partial throttle it sounds like stock. But when you go WOT it is a little louder than stock with a nice growling noise. In cabin you won't even be able to tell that you have an aftermarket catback. IT'S THAT GOOD!!!
Personally, I hate loud cars so being quiet while providing power was important to me ...

I bought mine from Kamispeed ....
www.kamispeed.com

Last edited by DaWorstPlaya; May 26, 2005 at 08:37 AM.
Reply
Old May 26, 2005 | 08:40 AM
  #8  
fsugatorbait's Avatar
Evolved Member
iTrader: (16)
 
Joined: Mar 2005
Posts: 1,338
Likes: 0
From: CT
Originally Posted by DaWorstPlaya
I have one and my bumper is fine. It doesn't blacken you bumper if you don't take out any of the cats. Sound wise, under idle it sounds like stock, even in upper rpms at partial throttle it sounds like stock. But when you go WOT it is a little louder than stock with a nice growling noise. In cabin you won't even be able to tell that you have an aftermarket catback. IT'S THAT GOOD!!!
Personally, I hate loud cars so being quiet while providing power was important to me ...

I bought mine from Kamispeed ....
www.kamispeed.com

Good info, I had the RM-01A on my si and loved it. Have you dyno'd the car? Im concerned that with the step downs at the resonators it will rob a few hp. Was yours fitted with the 02 bung?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RavSpec
RavSpec - JDM Wheels Central
1
Mar 5, 2016 06:58 AM
RavSpec
Evo 'For Sale' External Engine / Power
0
Aug 24, 2015 02:36 PM
rocketscience
Evo General
9
Jun 21, 2009 06:37 PM
rhds13
Evo Engine / Turbo / Drivetrain
15
Nov 21, 2006 04:45 PM
rey_vibora
Private 'Evo 1 - 9' For Sale / Wanted
43
Apr 17, 2005 11:40 PM




All times are GMT -7. The time now is 05:05 PM.