Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

leaking throttle body

Thread Tools
 
Search this Thread
 
Old Apr 3, 2005 | 09:53 AM
  #1  
Novtec1's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (17)
 
Joined: Dec 2003
Posts: 540
Likes: 2
From: home of the Field Artillery, Ft. Sill OK
leaking throttle body

went down to dallas yesterday to get tuned by mark for turbotrix got most boost i got out the car on the way down was 20.5 and it was set for 21. i justhought it was l lil warm and didn't think about it. get the car on the dyno, first pull 16 lbs, next 14 next 17 so we take the car off let it cool of i check all the hose and we decide to to a pressure test and hear air coming out the throttle body.... mark said this was a common problem on 1g DS's but he never seen it on a evo. anyone know anything about this.? any help would be appreciated.
Reply
Old Apr 3, 2005 | 09:58 AM
  #2  
TrinaBabe's Avatar
Evolved Member
iTrader: (3)
 
Joined: Sep 2004
Posts: 2,377
Likes: 1
From: Winona, MN
Chances are it is just the hose clamp holding the upper IC pipe to the throttlebody. Use a T-Bolt clamp and it won't leak. Hair spray also helps out.
Reply
Old Apr 3, 2005 | 10:22 AM
  #3  
Novtec1's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (17)
 
Joined: Dec 2003
Posts: 540
Likes: 2
From: home of the Field Artillery, Ft. Sill OK
nope its not that... it comes from the throttle body and when you tighten the throttle down it stops leaking. everyone thinks is the shaft the butterfly is bent or something. im gonna pull it off and look at it today
Reply
Old Apr 3, 2005 | 11:34 AM
  #4  
Deepseadiver's Avatar
Evolved Member
iTrader: (3)
 
Joined: May 2004
Posts: 1,102
Likes: 0
From: GUAM, USA
Keep us posted. (us = people with boost problems)
Reply
Old Apr 3, 2005 | 01:01 PM
  #5  
Novtec1's Avatar
Thread Starter
Evolved Member
Veteran: Army
iTrader: (17)
 
Joined: Dec 2003
Posts: 540
Likes: 2
From: home of the Field Artillery, Ft. Sill OK
well i found my problem... leaking tb gasket..... got into boost at idle my friends sprayed some carb cleaner in it and we found the leak.. at the top of the tb. so tomorrow i'll order some new gaskets.
Reply
Old Apr 3, 2005 | 06:52 PM
  #6  
yesevo's Avatar
Evolved Member
iTrader: (13)
 
Joined: Jan 2005
Posts: 1,323
Likes: 0
how to put load (boost) on idle?
Reply
Old Apr 3, 2005 | 09:22 PM
  #7  
Deepseadiver's Avatar
Evolved Member
iTrader: (3)
 
Joined: May 2004
Posts: 1,102
Likes: 0
From: GUAM, USA
^^ Not at idle Mabye he was on a dyno?
Reply




All times are GMT -7. The time now is 09:23 PM.