GT35/40R vs. AlienAuto Turbo! CHECK IT OUT!
Originally Posted by AMS
Spool better than a GT35R? according to who or what test results?
2.5L?
1997cc 85mm bore, 88mm stroke - stock 4G63
2270cc 85mm bore, 100mm stroke crank - stroked 4G63
2351cc 86.5mm bore, 100mm stroke crank - 4G64
2378cc 87mm (.020 over), 100mm stroke crank -4G64 .020 over
2433cc 88mm (.060 over), 100mm stroke crank - 4G64 .060 over
and you're still not at 2.5L, you plan on going .080 or .100" over?
or you can get a custom crank made with a larger stroke, or get the rod journals welded and offset ground.
Why do you say you will have cooling problems?
-Martin
2.5L?
1997cc 85mm bore, 88mm stroke - stock 4G63
2270cc 85mm bore, 100mm stroke crank - stroked 4G63
2351cc 86.5mm bore, 100mm stroke crank - 4G64
2378cc 87mm (.020 over), 100mm stroke crank -4G64 .020 over
2433cc 88mm (.060 over), 100mm stroke crank - 4G64 .060 over
and you're still not at 2.5L, you plan on going .080 or .100" over?
or you can get a custom crank made with a larger stroke, or get the rod journals welded and offset ground.
Why do you say you will have cooling problems?
-Martin
That’s what I hate about these forums. Flaming flaming and flaming whether vendor is flaming a customer like Chris or member flaming a vendor. Take it easy guys. The guy is working hard with some people to get this thing going so why should we doubt him!!! Let him finish and we will see. After all he had a 640~ WHP EVO that he build himself from the ground up with no one help.
Originally Posted by Az3ar
That’s what I hate about these forums. Flaming flaming and flaming whether vendor is flaming a customer like Chris or member flaming a vendor. Take it easy guys. The guy is working hard with some people to get this thing going so why should we doubt him!!! Let him finish and we will see. After all he had a 640~ WHP EVO that he build himself from the ground up with no one help.
I think it's fantastic that someone is working on new, potentialy very powerful upgrades for the EVO. I wish him luck.
Originally Posted by 2k4EvoVIII
Martin:
I just wanted to say that your a great guy! There is allot of ways you can get to the 2.5L thats not a problem. Im sure you guys have thought about or are messing with the same things we are.
Anyway we will know more and should be able to give out everything in 3-4 weeks.
Oh and im not sure why i posted that .20 over thing on a earlier post dont know what i was thinking???
Chris
I just wanted to say that your a great guy! There is allot of ways you can get to the 2.5L thats not a problem. Im sure you guys have thought about or are messing with the same things we are.
Anyway we will know more and should be able to give out everything in 3-4 weeks.
Oh and im not sure why i posted that .20 over thing on a earlier post dont know what i was thinking???
Chris
Cool, I was scratching my head a bit when you said only .020" over
If you are doing a custom stroke crank make sure you use the best out there, going much over 100mm stroke is really going to be tough on longevity and reliability in high HP and high RPM applications. Let me know when you get this beast done!
-Martin
Chris,
plz give me a call when you see this,
and check your phone message,
i need to return your head as you agreed, rods and pistons. they are not in good shape as you described.
Ben
regards
plz give me a call when you see this,
and check your phone message,
i need to return your head as you agreed, rods and pistons. they are not in good shape as you described.
Ben
regards
Originally Posted by Turboholic
Chris,
plz give me a call when you see this,
and check your phone message,
i need to return your head as you agreed, rods and pistons. they are not in good shape as you described.
Ben
regards
plz give me a call when you see this,
and check your phone message,
i need to return your head as you agreed, rods and pistons. they are not in good shape as you described.
Ben
regards
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
Account Disabled
Joined: Mar 2005
Posts: 137
Likes: 0
From: PA
Originally Posted by 94AWDcoupe
Good luck with that.
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
Originally Posted by 94AWDcoupe
Good luck with that.
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
Last edited by Turboholic; Apr 25, 2005 at 08:19 PM.
i hope i can return his head and get my money back,
and he can send you back another four values.
even he told me that he will return my money in a week.
and he can send you back another four values.
even he told me that he will return my money in a week.
Last edited by Turboholic; Apr 25, 2005 at 08:20 PM.
Thread Starter
Evolved Member
iTrader: (15)
Joined: Jan 2004
Posts: 1,493
Likes: 0
From: "Tri-Cities" WA
Originally Posted by Turboholic
i hope i can return his head and get my money back,
and he can send you back another four values.
anyone familiar about paypal buyer protection?
i might need to use that.
even he told me that he will return my money in a week.
and he can send you back another four values.
anyone familiar about paypal buyer protection?
i might need to use that.
even he told me that he will return my money in a week.
You then went to another builder once agian i told you to look on the webpage for the details of the head and you said ok and bought it. You received the item in question and now you are not happy with it.
And how dare you call up the our company and threaten them. It really shows what kind of person you are in my book.
The valves in the head you received are 1mm over so how are you going to say that they are the same head.
I have pictures of everything. Emails showing the whole conversation. So i wouldnt keep talking if i were you.
Thread Starter
Evolved Member
iTrader: (15)
Joined: Jan 2004
Posts: 1,493
Likes: 0
From: "Tri-Cities" WA
Originally Posted by 94AWDcoupe
Good luck with that.
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
I bought a set of evo valves from chris. had to wait three weeks to get them even though I stressed i needed them for an engine asap. Then when they arrive there are only 12 valves, not 16 like I paid for. And they weren't low mileage like new valves like described. they were well used and already cut on a valve grinder. Useless to me. Gave up after two weeks of hounding him for a refund.
I then get a call saying that the valves are cut and are missing valves. Hmm lets see you needed valves. I sent you 16 agian i have pictures of everything i send becouse of things like this. I then get a call saying that it is missing valves and you dont need them anymore. Hmm weird
Chris